-
Simply slide on a shaft and tighten the set screws. These adaptors work with any wheels that accept a 12mm hex pattern. These adaptors require a 3/32 hex key. -
1/2" OD x 1/4" ID bearings Weight: 0.65 oz (each) Use with aluminum, carbon fiber, or steel tubing. Works great with PVC too! For mounting inside, we suggest using a 6-32 tapped standoff and 1/4" plastic spacers (shown above). -
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/8" to 6mm|Length: .75"|Diameter: .42" -
Material: Aluminum Coupling Style: Clamping Hole Pattern: 0.770" -
The 10-32 set screw requires a 3/32" Hex Key (sold separately) Compatible with our 1/4" PrecisionShafts and 1/4" D-shafts. Manufactured from hardened brass -
Complete set of Arduino's most common and useful electronic components. 21 lessons for Arduino starters and enthusiasts Detailed tutorial including project introduction and their source code will come with the kit -
This clamp requires a 7/64" Hex Key To make these hubs compatible with our 0.770" hub pattern, use our 1.50" x 0.770" Hub Adaptor. -
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/8" to 4mm|Length: .75"|Diameter: .42" -
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/4" to 8mm|Length: .75"|Diameter: .50" -
1 KG (approximately 2.20 lbs) Spool; Eco-Friendly, Odorless. Less Warping 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant -
1 KG (approximately 2.20 lbs.) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant -
1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant -
Bullet Point 1 Bullet Point 2 Bullet Point 3 -
1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant -
1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) ABS (Acrylonitrile Butadiene Styrene) 3D Printer Filament Vacuumed Sealed With Desiccant -
Dimensional accuracy: Diameter variance of no more than 30 microns for consistent feeding and better 3D prints. High compatibility: 3D Solutech PLA Filamet is compatible with nearly all 3D printers, including RepRap derivatives and those from MakerBot (such as the Replicator and Replicator 2), Ultimaker, Bits from Bytes, Airwolf3D, Makergear, Printrbot, Bukobot, Type A Machines, and many others. 3D Solutech engineered its Professional 3D Printer filament to strict tolerances and the highest quality standards, ensuring trouble-free operation with your 3D printer and superior results. -
REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling. SAFE POWER SUPPLY: Ender 3 Pro comes with a UL Certified power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes. RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages. -
1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant -
1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant -
1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant -
1)ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip; 2) Supporting display :2.8 inch, 3.5 inch color touch screen and Ender3 printer LCD12864 screen; 3)Support BLtouch, RGB color lamp, block detection, shutdown and other functions; -
eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) Recommended Extrusion/Nozzle Temperature 205C - 225C -
1.75mm see through white pla filament For common 3d printers such as makerbot, RepRap, afinia, up, Mendel, flash forge, solidoodle 2, printrbot lc, makergear m2 and etc. Temperature range is 190 degree C - 220 degree C -
1KG net (approximately 2.2 lbs) Filament with Clear Spool eSUN PLA PRO 3D Printer Filament Vacuumed Sealed With Desiccant. Superb layer bonding. Several times stronger than PLA. 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.05mm) -
1*Upgraded Creality 3D Printer All Metal MK-8 Extruder Feeder Drive 1.75mm Filament for Ender 3/3 Pro/3 X, Ender 5/5 Plus/5 Pro, CR-10 Series, CR-10S, CR-10 Plus, CR 20/20 Pro, CR-X.It makes loading the filament easier and smoother, no worries about filament scraping or breaking. 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. 1 pair- small and large pneumatic couplers to secure PTFE in extruder and hotend. -
Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 / TronXY X5S Orifice size: .4mm Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock -
1 KG (approximately 2.20 lbs) Spool 1.75mm Filament Diameter (Dimensional Accuracy +/- 0.03mm) PLA (Polylactic Acid) 3D Printer Filament Vacuumed Sealed With Desiccant -
Resume Print Function: Ender 3 has the ability to resume printing even after a power outage or lapse occurs. Easy and Qucik Assembly: It comes with several assembled parts, you only need about 2 hours to assemble 20 nuts well. Advanced Extruder Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; V-Shape with POM wheels make it move noiseless, smoothly and durable. -
FAST HEATING & RESUME PRINT： The heated bed can reach its operating temperature in just five minutes. The printer is shielded by its power supply from voltage spikes and power outages. If electrical power is lost, prints can be resumed from the last layer, saving time and reducing waste. PRINTING STABILITY： Improvements to the Y axis improve stability, and the alteration of the control box unit move the fan to the bottom of the unit, Make every printing works perfectly REMOVE EASILY:Our all new magnetic bed surface for easy model removal is included stock on the Ender 3 Pro. Easily remove the magnetic print surface from the hotbed and remove models with no spatula or razor necessary. -
Very easy to take off the models, NO tools to remove models Use clips to fix the glass plate on the hot bed. Higher temperature higher sticky. The models will stick on bed firmly when temperature is high -
UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit. STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder. EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.