-
Item type: Belt Model number: GT2 Timing Belts Item type: 2GT-6 Closed Loop belt
-
-
Item type: Nozzle Model number: 0.4mm M6 nozzle Threaded: M6
-
Package Includes: (No retail package) | 1 X Spiral Cable Wrap | . 100% brand new and high quality. Ideal for bundling cables behind your PC, TV, home cinema system or your desk for wiring looms, etc.
-
Item type: Ball Bearings Model number: DX-234
-
Item type: Pulley Model number: Timing Belt Pulley
-
Type: Garden Water Connectors Model number: 4-way Hose splitters Garden water connector type: Hose Splitters
-
100% Brand new and high quality 2-way connector pipe Can be easily connected to the pipe simply
-
-
External power MOS transistor to support larger currents and maximum current 20A (Because the module is limited by area, the current cannot be exceeded); ultra-quiet mode;small heat not easy to lose step;
-
High torque, good performance 46Ncm(65.1oz.in) holding torque NEMA 17 bipolar 42x42x48mm mm 4-wire
-
Size: About 150 * 0.5 * 0.2cm/59 * 0.2 * 0.09inch(L*W*H); Made of high quality material, it is durable and long lasting use. It is compatible with many stepper models.
-
Perfectly fit in,easy to install. Stable characteristics, high reliability. Full color function.
-
1.【Note:】 ---Be careful to see the direction of the drive when the driver is inserted into the motherboard --- Do good work before driving heat dissipation work (heat sink + fan) --- Pay attention to the line sequence and IO port when wiring. If the wrong line is connected, the drive will not work. ---- When inserting drive into the main board, pay attention to see the direction of drive, can not insert backward, to prevent drive from burning. 2.【Good heat dissipation】Large heat dissipation area, good heat dissipation effect. Configuration:UART microsteps: Up to 1/256 microPlyer: 1/256 Logic Voltage VI0: 3.3-5V Motor Voltage : 4.75-36V Motor Phase Current: 1.2A RMS, 2.0A Peak 3.【Potentiometer adjustment instruction】 The range of Vref value: default value: 1V (+0.2); MAX: 2V; MIN: 0V; Clockwise: Reduce Vref Counter-clockwise: increase driver current
-
Works extremely well with a wide range of filament like PLA, ABS, PETG, Wood ,HIPS and others Easy to install by chips Durable for long time repeat use as rigid material
-
A2 Hardened Tool Steel Nozzle Plated with TwinClad XT Fits: All printers with a E3D V4 / V5 / V6 1.75 Hotend / Prusa i3 MK2 / MK2S / MK3 / Anycubic 1.75mm Filament / M6 Threads
-
The motor is not easy to lose step; ultra-quiet mode; A large area of thermal pad, reduce the temperature of the driving work; Prevent motor shake;
-
-
-
High torque Low noise Nema 17 stepper motor with step angle 1.8deg Holding Torque: 45Ncm(63.74oz.in)
-
Perfect fit - Flawless 3D printing bed fit for Raise3D Pro2 Plus, Creality CR-10, Folger Tech FT-5 R2, and many more! Improves build plate adhesion - Maximize the adhesion of your print to the build plate by using this tape. This will minimize the chance of a print becoming loose and failing Eliminates gap lines - Eliminate all flaws and have a perfect print by eliminating gap lines from multiple strips of skinny tape
-
-
※1.【Working mode】 : Support STEP,DIR/UART mode , you can use these function via modify the firmware. ※2.【STEP/DIR Mode】:choice of working mode: MS1,MS2 ※3 .【TMC2209 V1.2 VS TMC2208, more of these functions】: 1. Current dynamic adjustment ※※ Coolstep--TMC2209 provides a current dynamic regulation technology that saves up to 75% of electrical energy.
-
1)The motherboard uses a 32-bit 168MHz ARM-grade Cortex-M4 series STM32F407IGT6 chip, which greatly improves its performance; 2)Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development, eliminating the worries of being unable to master the core code 3)Marlin 2.0 uses powerful development tools and Visual Studio Code integrated development environment: supports online debugging, which is more helpful for product development and performance optimization, and uses C / C ++ language development;
-
E3D V6 all metal hotend 0.4mm nozzle for 1.75mm filament (with Bowden add-on) (24V). The E3D V6 has been redesigned from the ground up: smaller, easier and higher performance. Use up to 300C with the supplied thermistor for Polycarbonate, Nylon, PLA, ABS and more.
-
Size: 150mm x 230mm x 3mm To print with ABS or PLA, lightly spray the surface of the glass with AquaNet hairspray, then install the glass. Flat Polished Edge for safe to handle
-
1.【Note: Cab only use this firmware】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/hardware/BTT SKR MINI E3 V1.2 2.【SKR MINI E3 V1.2 Manual】:https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3 3.【Notes on SKR mini E3 V1.2:】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/master/hardware/BTT%20SKR%20MINI%20E3%20V1.2/The%20Notement%20of%20BTT%20SKR%20MINI%20E3%20V1.2.pdf
-
-
-
Size:310mm x 310mm Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward Compatible with ABS, PLA, HIPS and other filament
-
Feature: this UV LED light with 6 high power 405nm UV LED, can fast cure the resin prints, make the objects cure much faster and stronger and use less time than usual ways. Material: this UV resin curing light is made of aluminum alloy shell and tempered glass lampshade, quite solid construction, ensures durability. LED UV lamps can be used for up to 10,000 hours. Usage: the LED UV lamp should be as close to the surface of the cured object as possible, the closer the distance, the better, within 5 cm to the light, the small size resin can be cured in 8-15 seconds, curing time is based on print size and thicker parts need more time.
-
1. The 32-bit frequency and 100MHz ARM-class Cortex-M3 series LPC1768 master chip has greatly improved performance; equipped with highly modular open source firmware Marlin2.0 and Smoothieware, convenient for users DIY and secondary development, using C language development, development It's easy. 2. It uses a dedicated power chip to support 12-24V power input; the same power can reduce the hot bed current to 1/4, effectively solve the hot bed MOS tube heating problem; support touch screen, LCD2004 screen, LCD12864 screen, system Can support and switch between Chinese (Simplified), English and other languages. 3. Use SD card to upgrade firmware, easy to operate; SPI working mode driven by TMC2130 on board and UART working mode driven by TMC2208, eliminating complicated wiring process, just use simple plug-in jumper cap to use; support Power failure, continuous material detection, shutdown, and other functions;
-
Quick and easy installation, folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room! Constant Temperature: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability Dustproof and good noise reduction
-
Package included: Stainless Resin Filter Cup + Silicon Funnel. + 100ml Measuring Cup Application: Filter cup, effectively filter impurities while pouring resin back into the bottle; Silicone funnel is used to pour resin back into a bottle, fit all kind of bottle ( the max width of the bottle neck is 9/16"). Material: Filter is made of stainless steel, easy to use and clean; Silicone Collapsible Funnel and 100ml Measuring Cup are made of quality silicone, soft, flexible, eco-friendly. Good match.
-
MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass) ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling
-
Plus bed sticker pc glue plus pc plate
-
Original 2K LCD screen used on ELEGOO Mars 3D Printer with tempered glassed pre-installed SHARP 5.5 inch LCD with 2560x1400 high resolution ensures your printing with high precision Extra MIPI connector provided for M05 or older version of Mars 3D printer users.(compatible with Anycubic Photon)
-
Super Quiet(Customized, Not Standard matching). Use TMC2208 motor drivers, which the key component to make the printer whisper like a computer cooling fan when printing. Marlin 1.1.8 pre-installed. Suitable for Ender 3, just plug it in and start printing. Bootloader pre-installed. The firmware can be modified by ARDUNO with USB cable.
-
Experience Pro-hesion- Our state of the art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand. This new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips As the hotbed heats to higher temperatures, it provides even more adhesion.
-
ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design. EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
-
ENDER 3 /ENDER 3 PRO Replacement LCD display screen. Premium material made, non-toxic and odorless, easy to use. Ender 3 screen comes with a knob and flex cable, making your printer work normally again.
-
Sindoh Bed platform 3Dwox Dp200 3D printer
-
Compatible with the replicator+, this kits includes the bendable flexes build plate so you can easily remove prints Attached on top of it is the grip surface for better adhesion when printing as well as reduced warping and curling 1 MakerBot+ flex build plate and 1 MakerBot grip surface build plate tape
-
Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments (sold separately) Durable construction allows for multiple uses with either the same or different filament material
-
Keeps MANY different 3D Printing materials adhered to build plates -- glass, carbon, metals, and other surfaces work great! Works for PEEK, CFPEEK, PEI & PEI Blends, PPSU, PSU, PPS, CF Nylon, PA6, PA12, PETG, ABS, and more! Formulated and Manufactured in Costa Mesa, California, USA
-
Experience Pro-hesion- Our state of the art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand. This new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues.
-
QUICK AND EASY INSTALLATION: folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room! CONSTANT TEMPERATURE: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability. DUSTPROOF AND GOOD NOISE REDUCTION:The interior uses Pure aluminum film and flame retardant appearance material.
-
TMC2209--The motor is not easy to lose step; ultra-quiet mode; TMC2209--A large area of thermal pad, reduce the temperature of the driving work; TMC2209--Prevent motor shake;Support stall detection;Support STEP / DIR and UART mode