-
MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass) ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling
-
QUICK AND EASY INSTALLATION: folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room! CONSTANT TEMPERATURE: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability. DUSTPROOF AND GOOD NOISE REDUCTION:The interior uses Pure aluminum film and flame retardant appearance material.
-
Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability. Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well. Quick and Easy Installation: Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room.
-
Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments (sold separately) Durable construction allows for multiple uses with either the same or different filament material
-
ALL THE ESSENTIAL TOOLS: Our kit has everything you need to remove, clean & finish 3D printed models plus keep your 3D Printer tuned and running to spec - in one convenient toolkit – an essential addition to any 3D printing system. EASY CLEANING: Clean your 3D prints, so they look like the pro prints on the 3D Printer Box! A 25 piece kit with 17 knife blades, long tweezers, needle nose pliers and glue stick. SIMPLE REMOVAL: Get your 3D prints off the print bed without damaging either! Slide one of the 3 removal tools under your print and lift (don’t pry) your prints away.
-
※1.【SKR V1.4 Turbo】Using 32-bit main frequency 120MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved; ※2.【SKR V1.4 Turbo】Using dedicated power chip M6130, support 12-24V power input; ※3.【SKR V1.4 Turbo】Double z-axis interface, eliminating the trouble of external drive expansion module;
-
Quick and easy installation, folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room! Constant Temperature: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability Dustproof and good noise reduction
-
It is applied to the Creality 3D CR-10V2 3D Printer. ADVANTAGE:Aims to make it easier to leveling the hot bed, precisely measuring the tilt of Bed surface and making every print have the perfect first layer, without the worrying about the bed leveling. High precision: The repeat-ability of BLTouch standard deviation is about 0.005mm, meanwhile high intelligent, self-test and alarm.
-
Compatible with the replicator+, this kits includes the bendable flexes build plate so you can easily remove prints Attached on top of it is the grip surface for better adhesion when printing as well as reduced warping and curling 1 MakerBot+ flex build plate and 1 MakerBot grip surface build plate tape
-
Premium Quality: Our Plexiglass Acrylic Kit comes in a very fine quality which means it has a very high resistance to heat and high temperature. It provides you the best quality prints and also Reduces printer noise. Acrylic sheets can be used in Ikea Lack Tables. Precision Cut: Plexiglass Acrylic kit is precision cut to ensure perfect edges and proper dimensions. These Acrylic Sheets are designed to perfectly fit the Enclosure provided by Prusa and IKEA Lack Side table. High Clarity: Each Acrylic sheet comes with a protective paper to ensure a Clear finish and safety from scratches. Our Acrylic Sheets offer Great Visual Clarity which makes it easier to see through.
-
This list is Pololu trillion rupiah , or ramps short. It was designed as a low-cost small package RepRap needs to accommodate the entire electronics . Oblique interfaces with the powerful MEGA platform Mega , and have plenty of room for expansion. On the stepper drives and a MEGA shield extruder control electronics for easy maintenance , replacement parts , upgrades and expansion capabilities , including plug-in modular design . In addition, some expansion boards can be added to the system , as long as the main ramp plate is saved to the top of the stack The board is mainly based on Adrian 's Pololu_Electronics and work Tonok 's . The proposed anti- Vick copper etching method . Vick is also inspired by the work of EasyDrivers .
-
1)The motherboard uses a 32-bit 168MHz ARM-grade Cortex-M4 series STM32F407IGT6 chip, which greatly improves its performance; 2)Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development, eliminating the worries of being unable to master the core code 3)Marlin 2.0 uses powerful development tools and Visual Studio Code integrated development environment: supports online debugging, which is more helpful for product development and performance optimization, and uses C / C ++ language development;
-
No more scraping parts off the bed! Just remove magnetic bed and flex the plate to remove your parts! Then just place it back down to magnetically snap it into place Temperature resistant mat allows you print in materials like PETG and ABS without an issue! (Maximum 130℃) Comes with a sheet of bubble free pre-applied PEI
-
RAMPS 1.4 It is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade- ability and expansion. Additionally, a number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. Mega 2560 Mega2560 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program
-
❤ 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like. ❤ Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t. ❤ Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2.
-
1.【Note: Cab only use this firmware】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/tree/master/hardware/BTT SKR MINI E3 V1.2 2.【SKR MINI E3 V1.2 Manual】:https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3 3.【Notes on SKR mini E3 V1.2:】 https://github.com/bigtreetech/BIGTREETECH-SKR-mini-E3/blob/master/hardware/BTT%20SKR%20MINI%20E3%20V1.2/The%20Notement%20of%20BTT%20SKR%20MINI%20E3%20V1.2.pdf
-
Super Quiet(Customized, Not Standard matching). Use TMC2208 motor drivers, which the key component to make the printer whisper like a computer cooling fan when printing. Marlin 1.1.8 pre-installed. Suitable for Ender 3, just plug it in and start printing. Bootloader pre-installed. The firmware can be modified by ARDUNO with USB cable.
-
Easy to print and remove the parts by bending and popping off, when cooling, easy to print, easy to maintain. is a must 3D Printer part for Prusa i3 MK3, DIY or replace a new printer hot bed build surface. keep the flatness across whole area, more balanced thermal conductivity. Made of durable material, more strength and wear resistant. PEI Powder Coated Double Sided Textured Heat Bed Steel Sheet For Prusa I3 MK3. Easy to remove the models by bending or popping off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc. Make possible to add inductive Z-probe for some low-cost printers.
-
Experience Pro-hesion- Our state of the art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand. This new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips As the hotbed heats to higher temperatures, it provides even more adhesion.
-
Plastic resin tank customized for ELEGOO MARS 3D printer and the FEP film is pre-installed Made of Nylon 66 mixed with glass fiber, which has strong toughness and high rigidity. Durable design for long term usage 2 Lids for resin vats are provided to keep away dust, UV light source or direct sunlight
-
Perfect fit - Flawless 3D printing bed fit for Raise3D Pro2 Plus, Creality CR-10, Folger Tech FT-5 R2, and many more! Improves build plate adhesion - Maximize the adhesion of your print to the build plate by using this tape. This will minimize the chance of a print becoming loose and failing Eliminates gap lines - Eliminate all flaws and have a perfect print by eliminating gap lines from multiple strips of skinny tape
-
※1.【Working mode】 : Support STEP,DIR/UART mode , you can use these function via modify the firmware. ※2.【STEP/DIR Mode】:choice of working mode: MS1,MS2 ※3 .【TMC2209 V1.2 VS TMC2208, more of these functions】: 1. Current dynamic adjustment ※※ Coolstep--TMC2209 provides a current dynamic regulation technology that saves up to 75% of electrical energy.
-
Feature: this UV LED light with 6 high power 405nm UV LED, can fast cure the resin prints, make the objects cure much faster and stronger and use less time than usual ways. Material: this UV resin curing light is made of aluminum alloy shell and tempered glass lampshade, quite solid construction, ensures durability. LED UV lamps can be used for up to 10,000 hours. Usage: the LED UV lamp should be as close to the surface of the cured object as possible, the closer the distance, the better, within 5 cm to the light, the small size resin can be cured in 8-15 seconds, curing time is based on print size and thicker parts need more time.
-
1. The 32-bit frequency and 100MHz ARM-class Cortex-M3 series LPC1768 master chip has greatly improved performance; equipped with highly modular open source firmware Marlin2.0 and Smoothieware, convenient for users DIY and secondary development, using C language development, development It's easy. 2. It uses a dedicated power chip to support 12-24V power input; the same power can reduce the hot bed current to 1/4, effectively solve the hot bed MOS tube heating problem; support touch screen, LCD2004 screen, LCD12864 screen, system Can support and switch between Chinese (Simplified), English and other languages. 3. Use SD card to upgrade firmware, easy to operate; SPI working mode driven by TMC2130 on board and UART working mode driven by TMC2208, eliminating complicated wiring process, just use simple plug-in jumper cap to use; support Power failure, continuous material detection, shutdown, and other functions;
-
No Edge Curling - 2020 new Creality 3D printer glass bed provides stronger adhesion, molds will stick on bed firmly without glue, avoiding the issue of print edges curling. No-indentation Printing - Upgraded CR-10 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing. Excellent Flatness - Improved 3D printer tempered glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
-
Note: This module should be used with the Lerdge Motherboard, so you need to buy one if you don't have. Product Description: The power monitoring module, used with Lerdge 3D printer motherboard, can achieve power continued to play, automatically turning off after the printing finished, the software control the power off, monitor the power status and other functions. It can help to achieve interactive printing, and to help in the cases like the unexpected power off or you have to leave during the printing, and other similar issues, considered to be one of the most useful features in 3D printers.
-
HIGH END DESIGN - This high quality anime superhero face scarf, protect effectively from pollution. Cover area from top of the eyebrow to chin, Full Facial Protection from wind, UV, spray and splatter. COMFORTABLE EXPERIENCE - Good elastic masks is soft and comfortable, providing lasting comfort for user. One size can adjustable for most people. LIGHTWEIGHT & BREATHABLE - The moisture wicking fabric transfers heat and humidity away from your body and outside of the seamless bandana, keeping you cool. The quick dry fabric technology lets your mask bandana dry in minutes, instead of hours. Wear it as a face mask to protect your face from getting burned from the sun!
-
Experience Pro-hesion- Our state of the art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand. This new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues.
-
THE ESSENTIAL TOOLS FOR 3D PRINTING: Our kit has everything you need to remove, clean & finish 3D printed models in one convenient toolkit – an essential addition to any 3D printing system. EASY CLEANING: Clean your 3D prints, so they look like the pro prints on the 3D Printer Box! A 25 piece kit with 17 different knife blades, long tweezers, needle nose pliers and glue stick. SIMPLE REMOVAL: Get your 3D prints off the print bed without damaging either! Slide one of the 3 removal tools under your print and lift (don’t pry) your prints away.
-
COMPATIBLE: The Glass Bed is applicable with Creality Ender 5 Plus 3D Printer. Please confirm if this tempered glass bed compatible with your printer. Experience Pro-hesion: Our state of the art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand. No Edge Curling: Creality 3D printer glass bed provides stronger adhesion, molds will stick on bed firmly without glue, avoiding the issue of print edges curling.
-
Total 35 Pcs include: 1pcs Removed Scraper, 1pcs Tube Cutter, 1pcs Pliers, 2pcs Tweezers, 3pcs Cleaning Brushes, 12pcs Clean Up Knives, 15pcs Cleaning Needles. Cleaning Needle: 15 flexible stainless steel needles for gentle maintenance of your nozzles and difficult to reach places such as feed gears. 7 different sizes of cleaning needles can meet all your needs. Tweezers: 3D printing tweezers are suitable for maintenance nozzles and cleaning excess support material; it is anti-static, non-magnetic precision tweezers.
-
Practical for Use: This product can make 3D printers work better and print better. Make the wire easier and smoother, without worrying about wire scraping. Widely Compatible: Fits 1.75mm filament. 40 Teeth drive gear compatible with PLA / ABS / Wood / TPU / PTEG. Easy to Install: This gray metal extrusion mechanism kit comes with instructions on how to assemble, which makes it easier to install.
-
All hand saws of the mini hand saw include progressive serrations to make the model more delicate, leaving a cut on smooth surface. The mini hand saw is equipped with three interchangeable blades to meet different job requirements and provides a sturdy handle for heavy work. 6 pieces of carving knife, with high hardness, high strength, corrosion resistance, no rust and other characteristics, the knife sharp is not easy to blunt and durable.
-
1.【Note:】 ---Be careful to see the direction of the drive when the driver is inserted into the motherboard --- Do good work before driving heat dissipation work (heat sink + fan) --- Pay attention to the line sequence and IO port when wiring. If the wrong line is connected, the drive will not work. ---- When inserting drive into the main board, pay attention to see the direction of drive, can not insert backward, to prevent drive from burning. 2.【Good heat dissipation】Large heat dissipation area, good heat dissipation effect. Configuration:UART microsteps: Up to 1/256 microPlyer: 1/256 Logic Voltage VI0: 3.3-5V Motor Voltage : 4.75-36V Motor Phase Current: 1.2A RMS, 2.0A Peak 3.【Potentiometer adjustment instruction】 The range of Vref value: default value: 1V (+0.2); MAX: 2V; MIN: 0V; Clockwise: Reduce Vref Counter-clockwise: increase driver current
-
1*Upgraded Creality 3D Printer All Metal MK-8 Extruder Feeder Drive 1.75mm Filament for Ender 3/3 Pro/3 X, Ender 5/5 Plus/5 Pro, CR-10 Series, CR-10S, CR-10 Plus, CR 20/20 Pro, CR-X.It makes loading the filament easier and smoother, no worries about filament scraping or breaking. 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. 1 pair- small and large pneumatic couplers to secure PTFE in extruder and hotend.
-
EASY CLEAN UP: Removal of the support material around your 3D print is easy with the right tools! These 3D printing accessories help remove, clean and finish your model. 3 PIECE KIT: The three utility tools are double ended, consisting of 6 different blades, scrapers and picks in one compact tool kit. VERSATILE TOOLS:This convenient kit contains a range of accessories for removal of large sections of support material or to get into small or narrow crevices.
-
Safety Material - Our top quality PETG printing filament is made of food-grade material.It has no odor during the printing process.Ash Free technology allows our filament to burn off cleanly without any residue, enabling defect-free metal parts. Patent Clog Free Technology - Use unique patent technology improves the heat stability of PLA filaments with softening temperatures over 140℃. As a result,our PLA filaments show minimal softening in the “cold end” and can melt rapidly once entering the heating zone, leading to excellent printing quality and stabilized Foaming with zero risk of nozzle jams . Patent Warp Free Technology - Enables the production of Nylon-based filaments that can be 3D printed with excellent dimensional stability and near-zero warpage. This is achieved by the fine control of microstructure and crystallization behavior of Nylon, which enables the material to fully release the internal stress before solidification.
-
No Edge Curling - 2019 new Creality 3D printer glass bed provides stronger adhesion, molds will stick on bed firmly without glue, avoiding the issue of print edges curling. No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing. Excellent Flatness - Improved 3D printer tempered glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
-
SERRATIONS:All hand saws of the mini hand saw include progressive serrations to make the model more delicate, leaving a cut on smooth surface. SHARP:6 pieces of carving knife, with high hardness, high strength, corrosion resistance, no rust and other characteristics, the knife sharp is not easy to blunt and durable. CLEAR:The ruler adopts laser scale, the scale is clearly visible, wear-resistant and durable, not easy to wear, and the use is clear and clear.
-
COMFORTABLE FOR DAILY WEAR: Koaem's rings adopt 3D Printer Techniques and Hollow-Out Craft for a more comfortable wearing experience. PERSONALIZED RINGS: The leather inside ring is replaceable, increasing interest and achieving multiple effect on wearing.Width is 1/4 In, Weight is 1/6 OZ. ALL-MATCHING: We provide five pieces two-side leather with two tone colors, it makes the rings more fashionable and personalized.
-
F1rst Layer has assembled a collection of high quality upgraded parts to pair with your Ender series printer. Bringing together the best from large 3D printing brands such as Capricorn and Creality as well as our own high quality parts to ensure your machines runs as well as it possibly can. After installing all of the pieces in this bundle, you can expect more consistent and accurate feed rates, better results with retraction settings, less failures, and a bed that holds level much longer. The Capricorn XS Series tubing in this collection is for 1.75mm filament and rated for higher temperature usage than cheaper PTFE alternatives. The inner diameter tolerances are much tighter than competitors in the space and lead to much better performance in all Bowden style printers that use it. Capricorn is the most trusted name in PTFE tubing. The aluminum extruder is lightweight and strong, ensuring a more even feed rate over time as well as resisting wear much better than the stock 3D printers plastic extruders today. The full installation kit for the extruder is included and it is very easy and straightforward to switch to this upgraded part on your machine.