-
3D Printer Accessories (285)
-
No Edge Curling - 2019 new Creality 3D printer glass bed provides stronger adhesion, molds will stick on bed firmly without glue, avoiding the issue of print edges curling. No-indentation Printing - Upgraded Ender 3 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing. Excellent Flatness - Improved 3D printer tempered glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
-
Brand: Capricorn Length: 1 Meter ID: 1.95mm ± 0.05mm
-
Premium Quality--MK8 nozzles are made of high quality brass material.Heavy duty and provide a long service life.Easy to install and change. Precise Design--3d printer nozzles can prevent print head from leakage effectively and produce consistent prints with smooth and glossy polish.Reduce the resistance from the corners and avoid blocking of the filament with rounded chamfer.Easy to identify with engraving the size on each nozzle. Applicability and Compatibility--MK8 extruder nozzles fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original.
-
1)ARM Cortex-M3 Series STM32F103RCT6 Master Controller with 32-bit Main Frequency of 72MHz Chip; 2) Supporting display :2.8 inch, 3.5 inch color touch screen and Ender3 printer LCD12864 screen; 3)Support BLtouch, RGB color lamp, block detection, shutdown and other functions;
-
SIZE: 235mm x 235mm. Suitable for all FDM printer models, and all heated and non-heated 3D printer beds. EASY REMOVAL OF PRINTS: Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. SIMPLE INSTALLATION: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.
-
F1rst Layer has assembled a collection of high quality upgraded parts to pair with your Ender series printer. Bringing together the best from large 3D printing brands such as Capricorn and Creality as well as our own high quality parts to ensure your machines runs as well as it possibly can. After installing all of the pieces in this bundle, you can expect more consistent and accurate feed rates, better results with retraction settings, less failures, and a bed that holds level much longer. The Capricorn XS Series tubing in this collection is for 1.75mm filament and rated for higher temperature usage than cheaper PTFE alternatives. The inner diameter tolerances are much tighter than competitors in the space and lead to much better performance in all Bowden style printers that use it. Capricorn is the most trusted name in PTFE tubing. The aluminum extruder is lightweight and strong, ensuring a more even feed rate over time as well as resisting wear much better than the stock 3D printers plastic extruders today. The full installation kit for the extruder is included and it is very easy and straightforward to switch to this upgraded part on your machine.
-
-
1*Upgraded Creality 3D Printer All Metal MK-8 Extruder Feeder Drive 1.75mm Filament for Ender 3/3 Pro/3 X, Ender 5/5 Plus/5 Pro, CR-10 Series, CR-10S, CR-10 Plus, CR 20/20 Pro, CR-X.It makes loading the filament easier and smoother, no worries about filament scraping or breaking. 1*1 Meter Original Capricorn XS Serious Bowden PTFE tubing with lowest friction on the market. Less friction means more responsiveness, less retraction, more accurate prints, less slippage, wear, and tear on the extruder, and less clogging when printing chunky filaments such as some woodfills or ironfills. 1 pair- small and large pneumatic couplers to secure PTFE in extruder and hotend.
-
Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 / TronXY X5S Orifice size: .4mm Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock
-
✔️New Double Gear Extrusion Mechanism. Had to change the extruder e-steps from 100 to 139 ✔️UPGRADE: Perfect replacement for Creality 3D Printers CR-10/ CR-10S/ CR-10S Pro/ Ender 3/ Tornado, etc. ✔️All-metal aluminum alloy, High quality dual gear extrusion, stable and durable.
-
Package include: totally 22 pcs MK8 nozzles in 7 sizes, 2 x 0.2mm, 2 x 0.3mm, 10 x 0.4mm, 2 x 0.5mm, 2 x 0.6mm, 2 x 0.8mm, 2 x 1.0mm Parameter: input diameter 1.75mm; output diameter 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm; out thread: M6 Applicability and compatibility: fit for 3D Printer Makerbot Creality CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer
-
-
Very easy to take off the models, NO tools to remove models Use clips to fix the glass plate on the hot bed. Higher temperature higher sticky. The models will stick on bed firmly when temperature is high
-
Epoxy Coating for 3D Printed Objects Smooths 3D Printed Objects Compatible with SLA and SLS prints.
-
UPGRADE: Right hand extruder kit - Perfect replacement for Creality 3D Printers ENDER3, ENDER5, CR-10 Series, CR-10 S4, CR-10 S5, CR-10 Mini, CR-10S, CR-10 Plus. Upgrade your Creality 3D Printer Extruder with our New "Metal Anodised Aluminum" Upgrade Kit. STABLE and DURABLE: Full metal aluminum alloy, DIY kit and you need to assemble by yourself. Our MK8 extruder hotend include all the necessary screws & parts needed to directly replace your old original weak Creality plastic extruder. EASY TO INSTALL: All you do is unbolt the old original Creality plastic extruder & screw in the new "Metal Extruder" and ready to start printing. Used for 1.75mm filament of 3D printer MK8 bowden extruder frame.
-
Orignal resin tank used on ELEGOO MARS 3D printer and the FEP film is pre-installed Made of anodized aluminum and durable design for long term usage The extra lid is provided to keep away dust, UV light source or direct sunlight
-
Plastic resin tank customized for ELEGOO MARS 3D printer and the FEP film is pre-installed Made of Nylon 66 mixed with glass fiber, which has strong toughness and high rigidity. Durable design for long term usage 2 Lids for resin vats are provided to keep away dust, UV light source or direct sunlight
-
No Edge Curling - 2020 new Creality 3D printer glass bed provides stronger adhesion, molds will stick on bed firmly without glue, avoiding the issue of print edges curling. No-indentation Printing - Upgraded CR-10 glass plate has a much smaller CREALITY logo than older version, avoiding leaving logo indentations on molds surface during 3D printing. Excellent Flatness - Improved 3D printer tempered glass plate provides more flat and more smooth build surface than magnetic mat or pei sticker, ensuring high flatness for the bottom of model.
-
Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability. Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well. Quick and Easy Installation: Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room.
-
Premium Quality: Our Plexiglass Acrylic Kit comes in a very fine quality which means it has a very high resistance to heat and high temperature. It provides you the best quality prints and also Reduces printer noise. Acrylic sheets can be used in Ikea Lack Tables. Precision Cut: Plexiglass Acrylic kit is precision cut to ensure perfect edges and proper dimensions. These Acrylic Sheets are designed to perfectly fit the Enclosure provided by Prusa and IKEA Lack Side table. High Clarity: Each Acrylic sheet comes with a protective paper to ensure a Clear finish and safety from scratches. Our Acrylic Sheets offer Great Visual Clarity which makes it easier to see through.
-
Material: Aluminum & Stainless Steel & Brass Installation type: external thread connection Tip of the nozzle, aluminum heating block, Throat pipe
-
✔️ Compatible with Original Prusa MK3 or MK3S. Fully Pre-Assembled ✔️ The Prusa V6 HotEnd offers the same all-metal, high-performance reliability of the V6 ✔️ Prusa specific thermistor, heatbreak, 40W heater cartridge and Molex connector
-
No more scraping parts off the bed! Just remove magnetic bed and flex the plate to remove your parts! Then just place it back down to magnetically snap it into place Temperature resistant mat allows you print in materials like PETG and ABS without an issue! (Maximum 130℃) Comes with a sheet of bubble free pre-applied PEI
-
Double-Sided, Powder Coated ULTEM (PEI) FlexPlate Dimensions: 9.5 in x 10 in (254 mm x 241 mm) Fits Original Prusa i3 MK3S, Original Prusa i3 MK3, Original Prusa i3 MK2.5S, Original Prusa i3 MK2S with ULTISTIK Magnet installation, Original Prusa i3 MK2 with ULTISTIK Magnet installation
-
※1.【SKR V1.4 Turbo】Using 32-bit main frequency 120MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved; ※2.【SKR V1.4 Turbo】Using dedicated power chip M6130, support 12-24V power input; ※3.【SKR V1.4 Turbo】Double z-axis interface, eliminating the trouble of external drive expansion module;
-
Compatible with Original Prusa MK3 or MK3S The Prusa V6 HotEnd offers the same all-metal, high-performance reliability of the V6 Prusa specific thermistor, heatbreak and 40W heater cartridge
-
Enclosed Printing Chamber - Retain Printing Chamber Temperature Full LED Touch Screen Interface for Easy Operation Build Plate - Provides Flat and Smooth Printing Surface with Use of Industrial Grade Metal
-
TMC2209--The motor is not easy to lose step; ultra-quiet mode; TMC2209--A large area of thermal pad, reduce the temperature of the driving work; TMC2209--Prevent motor shake;Support stall detection;Support STEP / DIR and UART mode
-
QUICK AND EASY INSTALLATION: folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room! CONSTANT TEMPERATURE: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability. DUSTPROOF AND GOOD NOISE REDUCTION:The interior uses Pure aluminum film and flame retardant appearance material.
-
Experience Pro-hesion- Our state of the art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand. This new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips As the hotbed heats to higher temperatures, it provides even more adhesion. Perfect for those ABS prints with difficult warping issues.
-
Keeps MANY different 3D Printing materials adhered to build plates -- glass, carbon, metals, and other surfaces work great! Works for PEEK, CFPEEK, PEI & PEI Blends, PPSU, PSU, PPS, CF Nylon, PA6, PA12, PETG, ABS, and more! Formulated and Manufactured in Costa Mesa, California, USA
-
Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments (sold separately) Durable construction allows for multiple uses with either the same or different filament material
-
Compatible with the replicator+, this kits includes the bendable flexes build plate so you can easily remove prints Attached on top of it is the grip surface for better adhesion when printing as well as reduced warping and curling 1 MakerBot+ flex build plate and 1 MakerBot grip surface build plate tape
-
Sindoh Bed platform 3Dwox Dp200 3D printer
-
ENDER 3 /ENDER 3 PRO Replacement LCD display screen. Premium material made, non-toxic and odorless, easy to use. Ender 3 screen comes with a knob and flex cable, making your printer work normally again.
-
ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. Say goodbye to all those removal tools, spatulas, and knives with this genius design. EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands. CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models.
-
Experience Pro-hesion- Our state of the art carbon and silicone build surface provides the best adhesion in the market. Once the hotbed cools back to room temperature, the carbon-silicone base will release the model which can be easily removed by hand. This new glass plate can be placed on top of any existing hotbed surface and be held in place with simple clips As the hotbed heats to higher temperatures, it provides even more adhesion.
-
Super Quiet(Customized, Not Standard matching). Use TMC2208 motor drivers, which the key component to make the printer whisper like a computer cooling fan when printing. Marlin 1.1.8 pre-installed. Suitable for Ender 3, just plug it in and start printing. Bootloader pre-installed. The firmware can be modified by ARDUNO with USB cable.
-
Original 2K LCD screen used on ELEGOO Mars 3D Printer with tempered glassed pre-installed SHARP 5.5 inch LCD with 2560x1400 high resolution ensures your printing with high precision Extra MIPI connector provided for M05 or older version of Mars 3D printer users.(compatible with Anycubic Photon)
-
Plus bed sticker pc glue plus pc plate
-
MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass) ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling
-
Package included: Stainless Resin Filter Cup + Silicon Funnel. + 100ml Measuring Cup Application: Filter cup, effectively filter impurities while pouring resin back into the bottle; Silicone funnel is used to pour resin back into a bottle, fit all kind of bottle ( the max width of the bottle neck is 9/16"). Material: Filter is made of stainless steel, easy to use and clean; Silicone Collapsible Funnel and 100ml Measuring Cup are made of quality silicone, soft, flexible, eco-friendly. Good match.
-
Quick and easy installation, folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room! Constant Temperature: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability Dustproof and good noise reduction
-
1. The 32-bit frequency and 100MHz ARM-class Cortex-M3 series LPC1768 master chip has greatly improved performance; equipped with highly modular open source firmware Marlin2.0 and Smoothieware, convenient for users DIY and secondary development, using C language development, development It's easy. 2. It uses a dedicated power chip to support 12-24V power input; the same power can reduce the hot bed current to 1/4, effectively solve the hot bed MOS tube heating problem; support touch screen, LCD2004 screen, LCD12864 screen, system Can support and switch between Chinese (Simplified), English and other languages. 3. Use SD card to upgrade firmware, easy to operate; SPI working mode driven by TMC2130 on board and UART working mode driven by TMC2208, eliminating complicated wiring process, just use simple plug-in jumper cap to use; support Power failure, continuous material detection, shutdown, and other functions;
-
Feature: this UV LED light with 6 high power 405nm UV LED, can fast cure the resin prints, make the objects cure much faster and stronger and use less time than usual ways. Material: this UV resin curing light is made of aluminum alloy shell and tempered glass lampshade, quite solid construction, ensures durability. LED UV lamps can be used for up to 10,000 hours. Usage: the LED UV lamp should be as close to the surface of the cured object as possible, the closer the distance, the better, within 5 cm to the light, the small size resin can be cured in 8-15 seconds, curing time is based on print size and thicker parts need more time.
-
Size:310mm x 310mm Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward Compatible with ABS, PLA, HIPS and other filament
-
-