-
Non-flammable, non-corrosive—increased health and safety for employees Suitable for a variety of substrates, including metals, most plastics and rubbers—opening up your design possibilities HY 4090 is ISO 10993 compliant—suitable for the assembly of disposable medical devices
-
6" wide x .015" thick x 100' long Prevents Marking On Various Materials Produces Clean and Precise Bends
-
Two-part methacrylate adhesive Requires minimal surface preparation Designed for structural bonding of thermoplastic, metal and composite materials
-
Quantity: 12 10.1 fluid ounce cartridges Color: gray Sealant type: polyurethane
-
Ideal for bonding tub surrounds to most common building materials No etching or burn through guaranteed No venting or flashing required
-
Excellent for small joints and fillets, windows, door frames, reglets, flashing, common roofing detail applications, and many construction adhesive applications Excellent adhesion - bonds to most construction materials without a primer. Certified to the NSF/ANSI Standard 61 for potable water.
-
ADHESIVES SEALANTS & TAPES Country of Manufacturer: United States Manufacturer: LOCTITE
-
UL Listed and recommended for all voltages When stored in its original container in cool (under 100 degrees F) dry environment, PENETROX oxide inhibiting compound will remain workable
-
A medium viscosity retaining compound that resists temperatures up to 400ºF Applicable to most metals Multi-Purpose Compound
-
Non-sag Gel consistency prevents adhesive flow, even on vertical surfaces Gap filling up to 0.02 in (5 mm)
-
8X more coverage than traditional adhesive caulks Quick and easy application Adheres to wet and frozen wood
-
12 - 10.1 oz Tubes Color: Limestone Material: Polyurethane Sealant
-
-
Vulkem 116 has a 30-year history of delivering superior primerless adhesion to porous substrates, which makes it the choice for sealing expansion joints in commercial construction applications Vulkem 116 is suitable for certain water immersion applications. Vulkem 116 is rated for +/-25% movement capability.
-
Multi-purpose bonding and long lasting seals Permanently elastic to allow joint movement 60-90 skin time; paintable, once skin forms
-
2-part, high-density liquid polyurethane expanding pour foam cures very hard and rigid, with high compressive strength ideal for structural support, architectural castings, art-related applications, and flotation. 6 lb. density formula is great for plug making, filling buoys, creating sculptures, and more. Cures to a rigid, 94% closed-cell foam, where each individual cell traps air and prevents liquids like water, gas, and oil from penetrating.
-
Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals, wood, epoxy, polyester and acrylic resin. Fast cure rate. Good weathering and water resistance.
-
ADHESIVES SEALANTS & TAPES Country of Manufacturer: United States Manufacturer: LOCTITE
-
Provides excellent coverage and is easy to apply Designed for use on moisture-absorbent substrates EDPM and TPO only
-
Creates strong bond on low surface energy plastics (LSE) such as polyolefin with minimal or no surface prep required Resists many chemicals, water, humidity and corrosion Formulated to bond multi-material assemblies such as LSE plastics, thermoplastics, composites and metals
-
Adhesives & Sealants Country of manufacture: United States Manufacturer: Crack Stix
-
Easily tinplates copper circuits on PC boards in 7-10 minutes High tin concentration, No dilution required Rinsable residues
-
ISO 10993 Certified UV Light Cure Adhesive High Viscosity
-
Be Careful: Sold by Newflager brand is the ONLY certified products in this listing.Please buy this brand. Wide Compatibility: Spray foam tubes are ideal used as replacement tubes for most major brands of DIY spray foam easily. Assemble of foam Sealant triger and tube.
-
Primer less to glass Fast curing One-component and conventional-cure adhesives
-
Comes in half and full cases High movement joints - ASTM C920 Class 100/50 Excellent primer-less adhesion to many substrates
-
-
-
-
Highly elastic and durable Resistant to aging and weathering exposure Non-corrosive
-
Quantity: 1 - 10.3 fluid ounce cartridge Color: black Sealant type: polyurethane
-
Maximum performance and reliability with the Hilti GX 120 system Gas Canister
-
Bonds to Porous and Non-Porous Surfaces Will Compress to 1/16" (1.6 mm) for Mirror Overlays Fast Permanent Bond, Yet Remains Very Flexible
-
Bonds most foamed plastics, plastic laminate, wood, plywood and canvas to themselves and to each other Creates a very high strength, high temperature resistant bond with up to a four hour bonding range Adhesive can be applied by spray, brush or roller
-
3M Panel Bonding Adhesive is a two-part epoxy adhesive which provides extended work-time but can be rapidly cured with heat. It is packaged in a 200 ml cartridge and is to be used in conjunction with our 08117 Premium Manual Applicator and the 08193 Static Mixing Nozzles. Panel Bonding Adhesive has excellent adhesion to a wide variety of plastic and metal substrates.