-
3M Panel Bonding Adhesive is a two-part epoxy adhesive which provides extended work-time but can be rapidly cured with heat. It is packaged in a 200 ml cartridge and is to be used in conjunction with our 08117 Premium Manual Applicator and the 08193 Static Mixing Nozzles. Panel Bonding Adhesive has excellent adhesion to a wide variety of plastic and metal substrates.
-
Advantages of LOCTITE Retaining Compared to Conventional Assembly Methods Higher strength with simplified and less costly designs Reduces dependence on machining tolerances Prevents corrosion and fretting Load and stress is distributed evenly over the Joint When Used in Combination With Interference Fits, LOCTITE Retaining Compounds Allow: Higher load transmission and better performance with existing designs and geometry. Equal performance with relaxed tolerances. Reductions in the size and weight of an assembly. Problems With Conventional Assembly Methods that LOCTITE Retaining Products Can Help Overcome Pins, key/keyway assemblies have uneven distribution of mass, an imbalance that can lead to vibration at high speeds. Splines and serrations cause high stresses due to the “notch effect” that occurs in the area of a key. And they have high machining costs. Clamp rings, press fits, shrink fits, and taper fits rely on friction alone to transmit torque, therefore they are limited by material, surfaces a
-
For best results, clean all surfaces (external and internal) with a LOCTITE cleaning solvent and allow to dry. 2. If the material is an inactive metal or the cure speed is too slow, spray all threads Shake the product thoroughly before use. To prevent the product from clogging in the nozzle, do not allow the tip to touch metal surfaces during application.