-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/8" to 6mm|Length: .75"|Diameter: .42"
-
-
1/2" OD x 1/4" ID bearings Weight: 0.65 oz (each) Use with aluminum, carbon fiber, or steel tubing. Works great with PVC too! For mounting inside, we suggest using a 6-32 tapped standoff and 1/4" plastic spacers (shown above).
-
Simply slide on a shaft and tighten the set screws. These adaptors work with any wheels that accept a 12mm hex pattern. These adaptors require a 3/32 hex key.
-
0-5.5volt tolerant pins 0-6volt measurement Pin 1Hz - 40MHz frequency measurement