-
Primer ensures better adhesion of paint to the surface, and it increases durability as well as provides additional protection for the material being painted. It can only be used to promote adhesion of tapes to surfaces such as polyethylene, polypropylene, wood, glass, PET/PBT blends, ABS, metal, concrete and painted metal surfaces. The bonding surface must be relatively clean and dry and make sure the primed surface remains free from contaminants before you apply the tape.
-
✅ Go3DPro is Official Authorized Distributor of Shining 3D EinScan Products. This product comes with FREE Worldwide Global WARRANTY by Shining 3D ✅ Supports 4 scanning modes with various optional accessories; Single shot scan accuracy ranges from 0.04mm to 0.1mm depending on scanning mode; 1.5M points per second/30fps; Single scan range is 130 x 100mm - 225 x 170 mm; Working distance 4m; Improved software with new UI and new operation mode which cans set the resolution option after scanning during data processing to enable faster scanning;
-
Open Source Filament: the first XYZ 3D printer that allows 3rd party 1.75mm ABS and PLA filaments New Aluminum Print Bed: more even heat distribution compared to common glass print bed allows a higher level of prints and New Innovative Calibration System: newly designed, frustration-free sensors and knobs ensure each print is perfectly calibrated UL listed “for the purpose of classification or evaluation with respect to one or more of the following: (1) specific risks only, e.g., casualty, fire or shock, (2) performance under specified conditions, (3) regulatory codes, (4) other standards, including international standards, or (5) such other conditions as UL may consider desirable.
-
【Abrasivr Buffing Wheel Set】25 mm abrasive wheel with 3 mm silver shank and 5 different grits, Brown 120Grit, Green 180Grit, Red 320Grit, Black 400Grit, Gray 600Grit, each grit 20 pieces, total 100 pieces. 【Size】Shanks are 1/8 inch (3mm), buffing wheels are 1" in diameter, 25 mm abrasive wheel 【Repair The Dents】Buff wheels enable you to achieve a smooth, uniform finish and conformability to irregular surfaces with minimal smearing,Great for all types of detail work in both hard and delicate materials.
-
*Extended shaft allows easy access for those hard to reach areas,Its shape makes it well suited for cleaning flat surfaces and getting into hard-to-reach places like slots *Suitable for removing rust and oxidation,great for cleaning and polishing small areas *Made of Stainless Steel, durable,long lifespan
-
Widely Application: The 11 pieces versatile grinding discs kit comes with 8 flap discs of 40/60/80/120 grit, nylon polishing disc, stripping disc, felt polishing disc, providing you with grinding, finishing and fine polishing in one kit. Premium Quality and Decent Performance: Made with fine-grade materials, our discs are strong, lightweight, safe and twice more durable than other replacements on market. We add fiberglass to each disc to absorb vibration so it’s more comfortable to use. Our kit can be used for a variety of applications, whether it’s metal or woodworking, concrete grinding or finishing, stone smoothing or finishing, paint or rust removal, and more.
-
2 Pack purchase offers significant savings over individual kit purchase Can cure underwater. Easy to Use 2 part hand moldable epoxy putty hardens in 50-60 minutes with final steel hard cure in 12 hours Use for pool and SPA repairs (plaster, gunite or fiberglass), Boats, RV, Auto, at work and around the house
-
The EinScan Pro Color Pack is an addition that you can purchase with your EinScan Pro 3D Scanner. Thanks to this little addition you can scan different textures and colors with the same scan. Best for color textures, such as animation effects, merchandise display, art (archaeology, museum) data archiving and other applications. Any questions please feel free to contact us and we are here to help.
-
【Large rigid aluminum frame】With a larger build volume of 12” x 12” x 13” (300mm x 300mm x 330mm) you can tackle larger print projects with confidence. The sturdy aluminum extrusion cube frame ensures that the gantry and build plate are fully supported and allow to print at higher speeds without fear of any fear of wobble or vibrations that are common in frames that incorporate plastic or printed parts in them which means less frustration and time wasted trying to improve print quality. 【Direct drive for more filament flexibility】The geared direct drive extruder now allows you the flexibility to use a wider range of filaments including the following:PLA/ABS/PETG/TPU/CF Nylon /Silk PLA /Wood and Metal infused filaments. And many more fantastic filaments that are compatible with the hotend’s maximum temperature of 260°C / 500°F. 【Appearance Upgraded】 We added RGB led lights on the printer with 3 modes of operation to make your printer look cooler: monochrome, flashing, and speed control. The RGB lights have a total of 7 colors options, which can remotely control the flicker frequency and change color in addition to the daily white light illumination model.
-
✅ Go3DPro is Official Authorized Distributor of Shining 3D EinScan Products. This product comes with FREE Worldwide Global WARRANTY by Shining 3D. Every order will be shipped out in SAME or 1 BUSINESS day with FREE Expedited Shipping!✅ With the Shining3D Color Pack 2X for the EinScan-Pro 2X, full-colour 3D models can be scanned. The Color Pack 2X is for the Shining3D EinScan Pro 2X.
-
New Operation Mode Option: Enhanced Handheld HD Scan Mode and enlarged scan range, is perfect for capturing 3D model of small to medium size objects with high efficiency. Scan Speed: Scan Faster than Ever Before: up to 1,500,000 points per second (30 fps) under Handheld Rapid Scan Mode. High Accuracy: Single scan accuracy under Fixed Scan without Turntable Mode is up to 0.04 mm. When using markers, the volumetric accuracy under handheld scanning modes is up to 0.05mm+0.3mm/m.
-
New Operation Mode Option: Enhanced Handheld HD Scan Mode and enlarged scan range, is perfect for capturing 3D model of small to medium size objects with high efficiency. Scan Speed: Scan Faster than Ever Before: up to 1,500,000 points per second (30 fps) under Handheld Rapid Scan Mode. High Accuracy: Single scan accuracy under Fixed Scan without Turntable Mode is up to 0.04 mm. When using markers, the volumetric accuracy under handheld scanning modes is up to 0.05mm+0.3mm/m.
-
New Operation Mode Option: Enhanced Handheld HD Scan Mode and enlarged scan range, is perfect for capturing 3D model of small to medium size objects with high efficiency. Scan Speed: Scan Faster than Ever Before: up to 1,500,000 points per second (30 fps) under Handheld Rapid Scan Mode. High Accuracy: Single scan accuracy under Fixed Scan without Turntable Mode is up to 0.04 mm. When using markers, the volumetric accuracy under handheld scanning modes is up to 0.05mm+0.3mm/m.
-
New Operation Mode Option: Enhanced Handheld HD Scan Mode and enlarged scan range, is perfect for capturing 3D model of small to medium size objects with high efficiency. Scan Speed: Scan Faster than Ever Before: up to 1,500,000 points per second (30 fps) under Handheld Rapid Scan Mode. High Accuracy: Single scan accuracy under Fixed Scan without Turntable Mode is up to 0.04 mm. When using markers, the volumetric accuracy under handheld scanning modes is up to 0.05mm+0.3mm/m.
-
EinScan Pro 2X Plus Multi-Functional Handheld 3D Scanner is Official Authorized Distributor of Shining 3D Incan Products. This product comes with FREE Worldwide Global by Shining 3D Supports 4 scanning modes with various optional accessories; Single shot scan accuracy ranges from 0. 04mm to 0. 1mm depending on scanning mode; 1. 5M points per second/30fps; Single scan range is 208 x 136 – 312 x 204 mm; Working distance 5. 1m; Improved software with new UI and new operation mode which cans set the resolution option after scanning during data processing to enable faster scanning; Mesh editing features such as hole filling, smoothing, sharpening added;
-
4 Scan modes: Handheld HD Scan/Handheld Rapid Scan/Automatic Scan/Fixed Scan Align Mode: Markers Mode for handheld HD scan; Feature/Markers Mode for handheld rapid scan; Markers/Feature/Turntable/ Manual/Turntable coded targets Mode for Auto scan( industrial pack is a must); Markers/Features/Manual Alignment Mode for Fixed Scan( industrial pack is a must). Single Shot Accuracy 0.1 mm/0.3mm/0.05mm/0.05mm for Handheld HD scan/handheld rapid scan/auto scan/fixed scan;
-
✅ Go3DPro is Official Authorized Distributor of Shining 3D. This product comes with FREE Worldwide Global WARRANTY by Shining 3D. Every order will be shipped out in SAME or 1 BUSINESS day with FREE Expedited Shipping!✅ Camera 1.3 mega pixel; Accuracy < 10 µm; Scanning Time: 8s for bite scan; 12s for upper/lower jaw scan; 12s for 1-4 dies scan; 21s for 5-8 dies scan; 58s for impression scan. Output Format: STL, OBJ, PLY; Interface: USB 3.0; Power: DC 24 V Two scanning modes are supported for articulator scan. Apart from the existing static scanning mode, a new dynamic scan mode is added, which can capture more of full jaw model to improve further occlusion precision. At the same time, it is also easy to operate, resulting in higher efficiency.
-
✅Go3DPro is Official Authorized Distributor of Shining 3D EinScan Products. This product comes with FREE Worldwide Global WARRANTY by Shining 3D. Every order will be shipped out in SAME or 1 BUSINESS day with FREE Expedited Shipping!✅ Camera 1.3 mega pixel; Accuracy < 15 µm; scanning range: 100 mm * 100 mm * 75 mm; Scanning time: bite: 13 s; upper/lower jaw: 30 s; 1-8 dies: 30 s; impression: 120 s. Output Format: STL, OBJ; Interface: USB 3.0; Power: DC 24 V The AutoScan-DS-EX 3D scanner provides an optimal data post-processing option through LAN net-work, and a revolutionary structure that allows easy upgrades for the foreseeable future. It is your ideal digital lab companion.
-
【The set includes】:1Pcs Diameter 42 x Height 20 x Round Shank 6mm,1 Pcs Diameter 55 x Height 25 x Round Shank 6mm. 【Good performance】: The bowl-type grinding head has a fine workmanship, is sharp and wear-resistant, and runs fast, enabling fast grinding. 【High-quality materials】: These polishing wheels are made of high-quality tungsten steel materials with high strength, high efficiency and long service life.
-
SET INCLUDES:This product includes 1PCS 42mm/1.65inx20mm/0.79in Grinding Head, 1PCS 55mm/2.17inx25mm/0.98in Grinding Head, 2PCs 6mm/0.24in Shank. GOOD PERFORMANCE:This polishing wheel is finely worked, so it is sharp and wearable, and it runs fast, enabling fast grinding. QUALITY MATERIALS:These buffing wheel is made of tungsten steel material, it is of high strength and long durability.
-
Non-toxic,non-hazardous, non-flammable, non-aerosol and water soluble.Tubes treated with this Sealant can be patched with a conventional vulcanized patch using a bit of patience and care! Fast Repair and Curing - It works well in any type of tires with strong adhesion, tubed or tubeless. Works well in any type of tires with strong adhesion, tubed or tubeless. Water-proof and temperature resistant ,Water repellant does not disintegrate with water.Long-lasting.
-
1. Removable, magnetic solid surface can easily remove the model. Say goodbye to all removal tools, scrapers and knives with this ultimate design. 2.Have you ever encountered this trouble? After printing the model by a 3D printer, it takes a lot of energy to separate the model from the moulding table. In the process, it even breaks the model, breaks the blade, and even damages the platform. Or hurt yourself. With this product, the mould can be taken very simply, the surface can be removed easily and flexibly. Simply print on the surface, remove the upper magnetic surface from the bottom, bend the flexible surface, and see that the model is 3.Say goodbye to all removal tools, scrapers and knives without needing blades, glue or textured paper.Flexible platform, firmly adhered
-
Clear, quick-drying, premium lock lubricant to loosen and protect all types of stuck home, auto and commercial locks Easily reach into narrow lock mechanism with the attachable straw or use the wider spray pattern to refurbish and protect the entire lock. Dries clear to the touch within minutes and is safe to use on metal, wood and most plastic surfaces.* *Except clear polycarbonate and polystyrene.
-
17 PIECE KIT: The cleaning accessories kit includes 13 sharp knife blades, 3 handles with steel collets for strength durability and convenient storage case. EASY CLEAN UP: Always have the right tool for quick cleaning of the support material around your 3D print. Theseknife toolstackle precision and large scale support removal. WORK ANYWHERE:The compact, durable 3" x 5" self-healing cutting pad protects furniture from knife marks while you clean up your 3D prints.
-
Silicone funnel + metal filter mesh 2 Set. (Orange + Blue). Funnel adopts high quality silicone as raw material, soft and pliable, healthy and eco-friendly, collapsible design, compact and convenient. Filter is made of stainless steel, easy to use and clean, effectively filter impurities while pouring resin back into the bottle.
-
The repair kit inlcude 10pcs tools. Include 6pcs repair knife,2pcs tweezers,1pc spade,1pc clipper,to meet your DIY requirements The 3D printer tools kit ideal for removing, cleaning and finishing the printed craft, meeting your all needs in DIY. The 3D printer tools help for manufacture toys, cars, robots, cartoon, and other crafts.
-
✔ Support the diversity of material. aluminum heating plate and wide temperature allow the printer, with many materials such as ABS, PLA.... etc. to work.. ✔ Large Print Size: 220 * 220 * 240mm and LCD panel. MK8 nozzle, Cut quickly, high printing precision, good result and easy to load filament, poye the complex construction molding. ✔ Quick installation: According to the instructions, you can assemble it quickly.
-
Easy Assembly: It comes with several assembled parts, it is very easy to assemble the machine Resume Print: The machine has the ability to resume printing even after a power outage or lapse occurs Advanced Technology: Upgraded extruder greatly reduces plugging risk and bad extrustion; Precision guide rail make it move noiseless, smoothly and long life service
-
Compact & Lightweight: This X1 3D printer offers 100 x100 x100mm printing size, supports One-Key printing with 0.4mm aluminum nozzle which is professional with high precision without clogging. ABS shell makes it ultra-lightweight. Small and easy to carry. Fast Heating & Safe Power Supply: The nozzle can reach its operating temperature(180℃) in just 3 minutes. The high-quality power supply is under 30W makes it super energy-saving and safe to use. Easy Assembly & Operation: It comes with two main parts, which only takes 10 minutes to assemble. Watching assembly video, no hassle to figure out how to put those components. Simply press the start button after the TF card inserted and start the printing with a preloaded G-code file. 3D printer for kids beginner adults school home.
-
EASY CLEAN UP: Removal of the support material around your 3D print is easy with the right tools! These 3D printing accessories help remove, clean and finish your model. 3 PIECE KIT: The three utility tools are double ended, consisting of 6 different blades, scrapers and picks in one compact tool kit. VERSATILE TOOLS:This convenient kit contains a range of accessories for removal of large sections of support material or to get into small or narrow crevices.
-
1.Product characteristics:It's a great 3D drawing tool for children and a great gift for friends! 2.Shipment List:Green 3D Printing Pad *1 3.It is only necessary to draw basic lines and shapes in the cushion groove with a 3D pen. This kind of mat will not stick on the printing filament, you can bend the mat, the filament can be removed from the mat surface very well. It makes your 3D pen drawing easier and more accurate.
-
Perfect fit - Flawless 3D printing bed fit for Raise3D Pro2 Plus, Creality CR-10, Folger Tech FT-5 R2, and many more! Improves build plate adhesion - Maximize the adhesion of your print to the build plate by using this tape. This will minimize the chance of a print becoming loose and failing Eliminates gap lines - Eliminate all flaws and have a perfect print by eliminating gap lines from multiple strips of skinny tape
-
CLEAN UP TOOL: Add the versatile tweezers to your 3D printing accessories kit for efficient support material removal, producing cleaner prints. NOZZLE CLEANING: Prevent burnt fingers when cleaning the printer nozzle and removing hot, oozing filament. STAINLESS STEEL:The 5” long tweezer 3D printing tool is made of strong, high quality coated stainless steel for a comfortable grip.
-
Crepe Paper Tape: industrial-grade painters masking tape with good holding power conforms to regular or irregular, flat and curved surfaces. This tape can also be used indoors for light-duty material holding, labeling, and bundling tasks Heat Resistance: paper masking tape is designed to withstand a wide range of temperatures up to 300F degrees high, making it suitable for paint bake applications. Tape with solvent resistance protects the paint from water Compatibility: tan masking tape has good adhesion, across various materials, like rubber, plastic, glass, and metallic surfaces. It is often used to create well-defined, clean lines in painting regular automotive and specialty vehicles
-
3M 94 Tape Primer is an adhesion promoter for use in conjunction with 3M Acrylic Foam VHB Tapes. For use on many plastics, rubber, metal, polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, painted and bare metal substrates. Coverage provided is 600 square feet per gallon of primer (or 1-1/4 square inches per 0.66mL ampule)
-
Translucent, 9.9 mil tape, proprietary backing, high tack acrylic adhesive, split liner High tack, 0F to 120F application temperature range, self-sealing around nails, conformable, thin, resists UV exposure for up to six months, eligible for LEED compliance credits, meets AAMA 711-05 Self-adhere, UV resistance, moisture barrier, air barrier, tear resistant, durable
-
3M Precision-Shaped Grain continuously fractures into sharp points that cut exceptionally fast, helping increase productivity Engineered to run cooler, reducing metal discoloration/oxidation and the chance of heat related stress cracks Reduces changeouts and downtime in robotic and pressure-assisted applications
-
3M Precision-Shaped Grain (PSG) maintains super-sharp points that cut exceptionally fast with less pressure Disc life is significantly longer, completing more parts per disc and requiring fewer disc changes Triangular shaped ceramic grain lasts up to two times longer than other ceramic abrasives—it wears evenly, runs cool, and optimizes mineral breakdown
-
Trial bag version (1 in. x 10 ft.) of 3M Dual Lock Reclosable Fastener SJ3560 Great for small jobs, prototyping and design evaluation Clear, interlocking mushroom-shaped heads (250 stem density per square inch) provide strong, reliable and durable fastening that can be opened and closed multiple times