-
Drippers (45)
-
Sprinkler Heads (56)
-
Drip Irrigation Kits (88)
-
Irrigation System Controllers (60)
-
Irrigation Tubing (41)
-
-
-
-
Connector for use with 1/2" and 5/8" Drip irrigation tubing Barbed ends grab tubing for a secure leak-proof connection Allows creation of a custom layout for your planting area
-
Connector for use with 1/2" and 5/8" Drip irrigation tubing Barbed ends grab tubing for a secure leak-proof connection Allows creation of a custom layout for your planting area
-
-
Plastic
-
Ideal for watering potted plants and plants spaced 10-inch to 20-inch apart Allows multiple drippers to be installed on a single 1/4-inch tubing line Cap off the end of the line by attaching a short piece of drip tubing to the last dripper and insert a 1/4-inch plug
-
Made in the USA Easy quarter-turn function The 1/4-in On/Off Valve is a featured element of the Landscape Stake Assembly
-
This fitting has a shutoff valve which can be used to turn off an individual line of drip tape. Simply punch a hole in the mainline tubing, connect the drip tape to the tape end of the fitting and insert the barbed end into the punched hole To create a tight seal, be sure tape is warm and pliable before attaching the 5/8" start fittings, and end fittings. If leakage continues to occur, a 1/4 turn with pliers should suffice This fitting allows a flow of over 80 GPH at 10 PSI
-
number 1 commercial-grade irrigation spray head brand in the world 4" pop-up height with easily adjustable 0 degree to 360 degree pattern ideal for watering odd-shaped areas Adjustable spray distance from 8' to 15'
-
3/8" ID (inside diameter) ball valves with hose barb connectors (3/8" ID) BUY WITH CONFIDENCE: We honor 90 days manufacturer's warranty against defects. 30 Days with Amazon 100% satisfaction guarantee + 60 Days extended warranty with FREE replacement Recommended use with 3/8" ID hose tubing
-
-
【2019 NEW DESIGN】Stop wasting your time to find the right bottle anymore, our plant watering device is suitable for all most bottles. It not only can be used for 1.1 inch bottle, all the bottles which opening is 0.8 inch -1.9 inch can be suitable. 【EASY TO USE】No tools are required for installation, No Need drill or cut holes at bottom of the bottle, place a regulating valve that will adjust the speed of flow. You can adjust the speed of the flow, so that the speed of the flow can be adjusted according to the length of the holiday. It Can continuously release the dropping for 1-15 days. 【MATERIAL】This plant watering devices is made of PP plastic, Each irrigation drippers ensure long service life. You can use it repeatedly.
-
-
-
ᴥ [DATA REFERENCE]: The automatic watering machine comes in three colors: orange, blue, and green. It is made of preferred environmentally friendly PP plastic.And it is 16.5cm long, 5.5cm wide and 30mm in diameter. The automatic flower watering device has a good permeability, and the watering speed can be adjusted. The pot plant watering nail can be used for general plastic beverage bottles, such as Pepsi bottle, coke bottle and so on. ᴥ [CONSTANT CURRENT DESIGN] : The plant self drip irrigation dropper can maintain air circulation without drilling holes. No matter which bottle you use, the self-watering nail will have an air circulation section, which will keep the pressure on the inside and outside the same without worrying about the water stopping halfway. ᴥ [ADJUSTABLE VELOCITY DESIGN]:Irrigation nail has the upgraded shape which is easy to use.Watering the plants with the regulator can control the flow, which can accurately control the speed and quantity, without having to worry about no water or too much water dripping speed and you can use a scale of 0-60 s/drop to control.What's more,valve can be inserted tightly and never loose.
-
PREMIUM QUALITY - Pressure compensating drippers - .7-5.0 BAR Pressure Range CONSTRUCTED OF UV RESISTANT MATERIAL WATER PRECISELY WHERE NEEDED!
-
Color: Black and Red Material: Plastic. Full open they will cover a 10 to 12 inch circle. Has a 1/4-inch barb thread connection, Suitable for 4mm/ 7mm(Inner/ Outer diameter) tube.
-
THREE SPARKLING FEATURES: [1]Conical bottle irrigation design suitable for 99% of the beverage bottles on the market. [2]An auxiliary holder was added to keep the plant watering spikes stable, windproof,anti-collapse [3]U-shaped switch interface, switch will not follow the rotation of the swith when adjusting the swith , the accurate mount of water delivery, make plants healthier EASY TO USE: Without any tedious installation, you just need simple assembly and drill some holes at bottom of bottle or cut it and then a regulating valve that can adjust the speed of the flow. this self watering spikes system ensure your plants hydrated. LONGER DURATION: On average, On average, a 1 liter bottle will last 10 to 12 days compared to most other self water devices last 2 to 5 days.a simple and effective way to get rid of plants when you away or have no time while you’re on vacation.
-
-
Color: Black. Material: Plastic . Connection: 1/4-inch barb thread connection, 1/4'' hose, Suitable for 4mm/7mm(Inner/ Outer diameter) tube and PE tubing . 360 Degree Adjustable: 8 spray hole and can adjust water flow rate , also for cutting off the water flow.Great for watering potted plants,For agriculture, lawn, garden sprinkler irrigation drip .
-
-
Ideal for attaching 1/2" flexible tubing Includes nail for application Universal design
-
❥【Adjustable Flow Speed】This plant watering spikes with new version slow release control valve switch.Provide different amounts of water for different potted plants or flowers.Unique automatic irrigation valves,watering plants while away,only need to adjust the water flow rate to meet your individual plants need. ❥【Suitable for Most Bottles】 This vacation plant watering system is suitable for almost all of the bottle.Not only the plastic drink bottle but also wine glass bottle.This plant self watering spikes can insert the plant waterer into the bottleneck directly.which can avoid water leakage effectively.If you insert the spikes to the soil vertically,it can bear whole wine bottle. ❥【Design Highlights】 This planter watering spikes no need to drill any holes at bottom of bottle or cut the bottle,no need to find 1.1-inch inner diameter bottles,suitable for inner diameter(0.72-1inch)of the bottle,almost all of bottle can use.Constant pressure design,stable water flow.The valve switch is medium in size and easy to operate.Dust-proof and fully enclosed design will not fall into dust or insects.
-
? Save 70% More Water: Set up the drip irrigation system, it can automatic irrigation according to your setting when you turn on the faucet and can save up to 70% water. Garden watering systems maximize watering efficiency and provide slow, steady water to plant roots. ?Automatic Irrigation:No need to water your plant separately, just install this diy irrigation system kit and turn on your tap, it will water your flowers, vegetable automatically. No longer worried about a business or leaving home for a holiday. ?Easy To Use: Simple installation without digging or plumbing skills. Easy installation with a manual with a picture. Just cut the flower bed hoses hose to the length of your choice, stake it down, and insert your drip emitters. (?TIPS: Soaking the end of the tubing in hot water for a minute before pushing the fittings on. It will be easier and as it cools down the tube will stay tight.)
-
8 spray hole and can adjust water flow rate, also for cutting off the water flow; Twist in counterclockwise direction can adjust the water, and you can turn it off by twist in clockwise direction, up to 1.3 meters in diameter; Can adjust water yield according to the actual situation, removable and washable.
-
For use with all sizes of 1/2-inch drip distribution tubing Removable top for easy cleaning Easy installation and use
-
Adjustable Water Dropping Speed: round flow valve can PRCISELY adjust the rate of water drop 0-90S/Peer Drop, support holding the bottle 0.5-2.5L that can keep watering 1-20 days, meet all we need in all kinds of situation: vocation, weekend daily using Widly Match All Kinds Of Bottlenecks: with a smooth surface, the cone adapter has a better seamless to avoid water leak and fit for most of normal drink bottles except thees wild bottleneck like milk bottle, fruit bottle Save Watering Time and Healthy Plants: with it, we can save a lot of time on daily plants watering and won¡¯t worry to miss watering some plants, Flower, Vegetable Plants can grow better in a condition of reasonable regulated watering
-
-
Save both water and money: 4 packs switch valve for use with 1/2 inch drip irrigation tubing, helping your adjust water to flow or to turn off, save your money Easy to use: top red handle turns to adjust or completely shut off water, easy to operate Operation: self-piercing design use with 1/2 inch drip tubing or insert into larger drip tubing; Fits most tubing 1/2 inch: approximately. 520 - 550 ID range
-
-
DESIGN: Barb design ensures tubing will not slip out or blow off at high pressure and temperature SIZE: For use with any 1/4" Inch tubing size - 4 to 7 mm (Can also be punched into 1/2 drip tubing). PREVENT LEAKS & BLOWOUTS: *****USE 22 UNITS PER LINE AT FULL OUTPUT 25PSI RECOMMENDED***** These emitters are designed with an operating pressure: up to 25 PSI. If your system is over that number blowouts and poor performance will occur.
-
Useful irrigation dripper is suitable for potted plants, ground covers, gardens, flower beds, vegetable gardens, herb gardens, greenhouses, orchards, lawns, volunteer plants, etc Irrigation angle: each dripper has 8 exit holes at the top, provide 360 degree coverage in multiple flow directions, unique umbrella spray mode Adjusting the water flow: the water flow can be adjusted by rotating the water outlet cover, adjust the amount of water according to actual needs, let plants grow healthily and save water resources
-
UPGRADED BRACKET: Unique tapered columns and tilt-inward top makes these self watering spikes fit on any sized bottle perfectly CONTROLLABLE FLOW:Upgraded valves are more accurate to control, allow you to adjust the water flow bit by bit, from slow release drips to auto water plants EASY TO USE,: without any cumbersome installation, all you need is to drill the bottle at the bottom or cut it.
-
0.5 gallon per hour pressure-compensating emitter delivers same uniform flow rate from beginning to end of tubing runs Slow watering rate allows soil to absorb water more completely in the root zones of plants Self-piercing design; use with 1/4" Drip tubing or insert into 1/2" or larger Drip tubing
-
5.0 gallon per hour pressure-compensating emitter delivers same uniform flow rate from beginning to end of tubing runs Slow watering rate allows soil to absorb water more completely in the root zones of plants Self-piercing design; use with 1/4" Drip tubing or insert into 1/2" or larger Drip tubing
-
-
Flow Rate: 4 Gallon per Hour / 16 Liter per Hour Barb Diameter: 6mm Outer Dia.; Working Pressure: 1 to 3.5kg Slow watering rate allows soil to absorb water more completely in the root zones of plants.
-
-
❀Upgraded Adjustable Valve❀The newest plant watering spikes valve can more precise control the dripping speed compared to the old version. Only adjust the valve to meet your needs without complicated setup steps. Save time and water. ❀Suitable for All Bottles❀You don't have to waste time looking for the right bottle anymore, this latest plant watering device suitable for all bottles (included the wine bottles). ❀Simple and Convenient to Use❀Universal design, no need to puncture. You don’t worry about the water pressure and don't need drill a hole at the bottom of the bottle. Say Goodbye to the problem of leakage.
-
Package included: 50 PCS barbed cross connector Only fit for 4mm / 7mm (Inner/ Outer diameter) tube 4 Way barbed cross connector, easy to install and not easy to drop off
-
【WATERING CUSTOMIZATION】 - Water all plants at once. The nozzle has two water outlet modes, columnar and mist, and each nozzle can be individually adjusted to meet the water needs of different plants at the same time. 【SAVING WATER】 -Plants drip irrigation system can save up to 70% in water savings. Precision watering system delivers just the right amount of water slowly and precisely right where your plant needs it – at the root zone. 【APPLICATION】 -PHILONEXT automatic irrigation kit is great for agriculture, lawn, garden, patio, greenhouse, mist cooling / irrigation, irrigation, humidification, balcony cooling.The water flow of each drip head can be individually adjusted .Just turn the drip irrigation head to set the flow.
-
Fits all major brands of tubing 1/2", 16mm - Approximately .520 ID Range High Impact Plastic Construction 20 piece value kit - 5 Tee's - 5 Elbows, 5 Couplings, 5 Figure 8 Ends
-
2 pcs in package plus large size, automatic watering tool waters plants perfectly for up to 2 weeks For use with houseplants, hanging plants and patio plants Benefit a lot when trip or traveling with this automatic watering aqua globe
-
FUNCTION: Help to fix the drippers or nozzles after completely inserting at the ends of the water pipe.Easy to install, securely connected, not easy to fall off. SIZE: About 3.50 * 2.00 * 0.4 cm / 1.40 * 0.80 * 0.16 inch (L * W * H). UNIVERSAL BARBED TEE FITTINGS: connect to 1/4" drip irrigation tubing in a "T" shape.
-
-
These non-corrosive plastic fittings are guaranteed to provided a secure, watertight and airtight connection These fittings offer strength and durability Use these high quality barbed straight 1/2" connectors for your irrigation or hydroponic systems