-
3D Printer Accessories (285)
-
-
Enclosed Printing Chamber - Retain Printing Chamber Temperature Full LED Touch Screen Interface for Easy Operation Build Plate - Provides Flat and Smooth Printing Surface with Use of Industrial Grade Metal
-
Use: Vehicles & Remote Control Toys Four-wheel drive attributes: Assemblage For vehicle type: Airplanes
-
1. Made of high quality material. 2. With greater friction and longer service life. 3. Easy to install and use.
-
Perfectly fit in,easy to install. Stable characteristics, high reliability. Full color function.
-
MADE IN THE USA: Single 1mm thick sheet installs quickly on top of existing flat build platforms (e.g. borosilicate glass) ABS and PLA filaments (along with many other materials) print directly on to PEI surface without the need for additional adhesives, tapes, or slurry REMOVE FILM FROM BOTH SIDES BEFORE USING: Blue protective film guards against scratches during shipping and handling
-
M6x17 D25H20 V/D style Vibration Damper Material:Metal & Rubber 20pcs a bag
-
QUICK AND EASY INSTALLATION: folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room! CONSTANT TEMPERATURE: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability. DUSTPROOF AND GOOD NOISE REDUCTION:The interior uses Pure aluminum film and flame retardant appearance material.
-
Constant Temperature: Keep a constant temperature printing environment, reducing the bad impact to printed models when low-temperature weather, improving printing stability. Safe to Use: The interior uses pure aluminum film and flame retardant appearance material. Technically, if in a fire, it will melt and not fire itself of the enclosure and will not spread as well. Quick and Easy Installation: Folding storage, easy to carry. Multi-faceted observation, reserved tool pockets. Economical 3D printing room.
-
Use: Vehicles & Remote Control Toys Material: Composite Material Rc parts & accs: Motors
-
PLA filament is eco-friendly, low shrinkage, high strength material. It compatible with all types of FDM 3d Printer, suitable for printing artworksand crafts. 100% no bubble 3d Printer filament. Diameter: 1.75mm Tolerance: +/-0.02mm
-
✔️ Compatible with Original Prusa MK3 or MK3S. Fully Pre-Assembled ✔️ The Prusa V6 HotEnd offers the same all-metal, high-performance reliability of the V6 ✔️ Prusa specific thermistor, heatbreak, 40W heater cartridge and Molex connector
-
Use: Vehicles & Remote Control Toys Four-wheel drive attributes: Assemblage For vehicle type: Airplanes
-
Item type: Heatbed Model number: MK Replicator 2
-
Build sheet adheres to a print bed to help the filament stick during printing, while also enabling clean removal of the printed part afterward Compatible with ABS, PLA, HIPS, PET+, brick, wood, and flexible (TPE) filaments (sold separately) Durable construction allows for multiple uses with either the same or different filament material
-
ALL THE ESSENTIAL TOOLS: Our kit has everything you need to remove, clean & finish 3D printed models plus keep your 3D Printer tuned and running to spec - in one convenient toolkit – an essential addition to any 3D printing system. EASY CLEANING: Clean your 3D prints, so they look like the pro prints on the 3D Printer Box! A 25 piece kit with 17 knife blades, long tweezers, needle nose pliers and glue stick. SIMPLE REMOVAL: Get your 3D prints off the print bed without damaging either! Slide one of the 3 removal tools under your print and lift (don’t pry) your prints away.
-
※1.【SKR V1.4 Turbo】Using 32-bit main frequency 120MHz ARM level Cortex-M3 series LPC1768 main control chip, the performance has been greatly improved; ※2.【SKR V1.4 Turbo】Using dedicated power chip M6130, support 12-24V power input; ※3.【SKR V1.4 Turbo】Double z-axis interface, eliminating the trouble of external drive expansion module;
-
Original 2K LCD screen used on ELEGOO Mars 3D Printer with tempered glassed pre-installed SHARP 5.5 inch LCD with 2560x1400 high resolution ensures your printing with high precision Extra MIPI connector provided for M05 or older version of Mars 3D printer users.(compatible with Anycubic Photon)
-
-
Quick and easy installation, folding storage, easy to carry, multi-faceted observation, reserved tool pockets. Economical 3D printing room! Constant Temperature: Keep a constant temperature printing environment, reduce the impact of printed products when low-- temperature weather, improve printing stability Dustproof and good noise reduction
-
TMC2209--The motor is not easy to lose step; ultra-quiet mode; TMC2209--A large area of thermal pad, reduce the temperature of the driving work; TMC2209--Prevent motor shake;Support stall detection;Support STEP / DIR and UART mode
-
ender-3 heat bed ender-3x heating bed Creality ender 3 heat platform
-
E3D V6 all metal hotend 0.4mm nozzle for 1.75mm filament (with Bowden add-on) (24V). The E3D V6 has been redesigned from the ground up: smaller, easier and higher performance. Use up to 300C with the supplied thermistor for Polycarbonate, Nylon, PLA, ABS and more.
-
Compatible with Original Prusa MK3 or MK3S The Prusa V6 HotEnd offers the same all-metal, high-performance reliability of the V6 Prusa specific thermistor, heatbreak and 40W heater cartridge
-
Fits: Creality CR-10 / CR-10S / CR-10-S5 / CR-10 MINI / CR-10-S4 / Ender 2 / Ender 3 / Ender 3 / TronXY X5S Orifice size: .4mm Kit Includes: Aluminum Cooling Block, Grade 5 Titanium Heat Break, Aluminum Heater Block, Brass Plated Wear Resistant MK8 .4mm Nozzle, Silicone Sock
-
Package Includes: 5x 3D Printer M3 Scew kit Item type: Spring Model number: N001
-
It is applied to the Creality 3D CR-10V2 3D Printer. ADVANTAGE:Aims to make it easier to leveling the hot bed, precisely measuring the tilt of Bed surface and making every print have the perfect first layer, without the worrying about the bed leveling. High precision: The repeat-ability of BLTouch standard deviation is about 0.005mm, meanwhile high intelligent, self-test and alarm.
-
3D printer Stepper Motor Flexible Coupling Coupler Size: 5 mm*5mm**25 mm Product Included:
-
Item type: Heated Block Model number: D-013 Material: Aluminium
-
Sindoh Bed platform 3Dwox Dp200 3D printer
-
-
Compatible with the replicator+, this kits includes the bendable flexes build plate so you can easily remove prints Attached on top of it is the grip surface for better adhesion when printing as well as reduced warping and curling 1 MakerBot+ flex build plate and 1 MakerBot grip surface build plate tape
-
1. A special connector can easily connect with the plug. 2. All-in-one design without needing to assemble. 3. The extruder parts equipped with volcano nozzle are quicker discharge, it has a large capacity.
-
Bundle includes Creality Platform Tempered Glass New Upgraded Heated Bed Build Plate Surface 235x235x3mm & Creality BLTouch V1 Auto Bed Leveling Sensor Kit Accessories for Ender 3/ Ender 3 Pro/Ender 5 3D Printer
-
Premium Quality: Our Plexiglass Acrylic Kit comes in a very fine quality which means it has a very high resistance to heat and high temperature. It provides you the best quality prints and also Reduces printer noise. Acrylic sheets can be used in Ikea Lack Tables. Precision Cut: Plexiglass Acrylic kit is precision cut to ensure perfect edges and proper dimensions. These Acrylic Sheets are designed to perfectly fit the Enclosure provided by Prusa and IKEA Lack Side table. High Clarity: Each Acrylic sheet comes with a protective paper to ensure a Clear finish and safety from scratches. Our Acrylic Sheets offer Great Visual Clarity which makes it easier to see through.
-
This list is Pololu trillion rupiah , or ramps short. It was designed as a low-cost small package RepRap needs to accommodate the entire electronics . Oblique interfaces with the powerful MEGA platform Mega , and have plenty of room for expansion. On the stepper drives and a MEGA shield extruder control electronics for easy maintenance , replacement parts , upgrades and expansion capabilities , including plug-in modular design . In addition, some expansion boards can be added to the system , as long as the main ramp plate is saved to the top of the stack The board is mainly based on Adrian 's Pololu_Electronics and work Tonok 's . The proposed anti- Vick copper etching method . Vick is also inspired by the work of EasyDrivers .
-
Size: 12V120W Product Size: 250 * 250 *3.0mm 1 layer 35?m (1oz base) copper
-
Feature: 1. Application: Suitable for most 3D printers. 2.Compact and lightweight
-
1)The motherboard uses a 32-bit 168MHz ARM-grade Cortex-M4 series STM32F407IGT6 chip, which greatly improves its performance; 2)Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development, eliminating the worries of being unable to master the core code 3)Marlin 2.0 uses powerful development tools and Visual Studio Code integrated development environment: supports online debugging, which is more helpful for product development and performance optimization, and uses C / C ++ language development;
-
No more scraping parts off the bed! Just remove magnetic bed and flex the plate to remove your parts! Then just place it back down to magnetically snap it into place Temperature resistant mat allows you print in materials like PETG and ABS without an issue! (Maximum 130℃) Comes with a sheet of bubble free pre-applied PEI
-
Keeps MANY different 3D Printing materials adhered to build plates -- glass, carbon, metals, and other surfaces work great! Works for PEEK, CFPEEK, PEI & PEI Blends, PPSU, PSU, PPS, CF Nylon, PA6, PA12, PETG, ABS, and more! Formulated and Manufactured in Costa Mesa, California, USA
-
RAMPS 1.4 It is a Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one small package for low cost. RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion. The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade- ability and expansion. Additionally, a number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack. Mega 2560 Mega2560 is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal oscillator. With the bootloader, download the program
-
❤ 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like. ❤ Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t. ❤ Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2.
-
Double-Sided, Powder Coated ULTEM (PEI) FlexPlate Dimensions: 9.5 in x 10 in (254 mm x 241 mm) Fits Original Prusa i3 MK3S, Original Prusa i3 MK3, Original Prusa i3 MK2.5S, Original Prusa i3 MK2S with ULTISTIK Magnet installation, Original Prusa i3 MK2 with ULTISTIK Magnet installation
-
Model number: Replicator Z18 Item type: Flexible Shaft Coupler name: Zamtac
-
ORGANIZES all your 3D Pen Accessories and Filament in a DURABLE, HIGH QUALITY EVA case with carry strap. Includes: Safety FILAMENT CUTTER, - Safely, Easily trims 3D Pen Filament Includes: Comfortable, Safe SILICON FINGER COVERS - CUSHION while printing, PROTECTS from HOT pen surfaces and filament
-
Orignal resin tank used on ELEGOO MARS 3D printer and the FEP film is pre-installed Made of anodized aluminum and durable design for long term usage The extra lid is provided to keep away dust, UV light source or direct sunlight
-
Advantage: 1.Tumbling treatment of mount plate surface. 2. It gives nice, pleasant looking uniform finish, removes edges