-
Robot Accessories (11)
-
Robot Parts (35)
-
Robot Platforms (11)
-
This clamp requires a 7/64" Hex Key To make these hubs compatible with our 0.770" hub pattern, use our 1.50" x 0.770" Hub Adaptor.
-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key
-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/4" to 8mm|Length: .75"|Diameter: .50"
-
These hubs use a 7/64" Hex Key These hubs utilize a 0.770" hub pattern.
-
1/2" OD x 1/4" ID bearings Weight: 0.65 oz (each) Use with aluminum, carbon fiber, or steel tubing. Works great with PVC too! For mounting inside, we suggest using a 6-32 tapped standoff and 1/4" plastic spacers (shown above).
-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/8" to 4mm|Length: .75"|Diameter: .42"
-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/8" to 6mm|Length: .75"|Diameter: .42"
-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key
-
Uses a 3F Standard Spline (25T) Width = 1/4" (.250") /Pressure Angle = 20° FTC Legal
-
Uses a 3F Standard Spline (25T) Width = 1/4" (.250") /Pressure Angle = 20° FTC Legal
-
Uses C1 Standard Spline Width = 1/4" (.250") / Pressure Angle = 20° FTC Legal
-
Uses a 3F Standard Spline (25T) Width = 1/4" (.250") /Pressure Angle = 20° FTC Legal
-
The 10-32 set screw requires a 3/32" Hex Key (sold separately) This coupler is made specifically for the Futaba 25 tooth spline. Compatible with our 1/4" Precision Shafts and 1/4" D-shafts.
-
The 10-32 set screw requires a 3/32" Hex Key (sold separately) Compatible with our 1/4" PrecisionShafts and 1/4" D-shafts. Manufactured from hardened brass
-
Use in conjunction with shafting and tubing Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key
-
20° Pressure Angle O.D. = Outside Diameter P.D. = Pitch Diameter A = Bore (Nominal shaft hole A is for a tight press fit on given shaft size) A- 1/4" P.D.- 1.375" O.D.- 1.438" B- .437" C- 1.168" G- .437" E = 0.095" F = 0.185"
-
-
Material: Aluminum Coupling Style: Clamping Hole Pattern: 0.770"
-
Simply slide on a shaft and tighten the set screws. These adaptors work with any wheels that accept a 12mm hex pattern. These adaptors require a 3/32 hex key.
-
Product Weight: 1.3 oz (no servo) Servo Spline Compatibility: 25T spline Servo Size Compatibility: Standard Size Servo
-
SOIC8/16 SOP8/16 Flash Chip IC Test Clips Universal Adapter Clips Socket Adpter Programmer BIOS/24/25/93 (SOP16 Clip+Cable+Adapter Board) Programmer Testing Clip Sop16 Sop Soic 16 Soic16 Pin Ic Test Clamp Sop16 To Dip8 Flash Clip For 25 Series Rt809F Tl866Cs Tl866A. Suitable for 25 Series Wide and Narrow Body Chips, Supports 150MIL-300MIL SOP16 Chips.
-
LCD display module white on Blue with Backlight, Built-in industry standard HD44780 equivalent LCD controller Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices LCD type: Characters
-
1) 2-layer structure design, platform panel can be freely loaded / DIY expansion, compatible with Arduino, Raspberry Pi platform for development 2) The chassis of the car has high stability, the aluminum alloy oxidized material chassis (thickness 3mm), the appearance is elegant and stable, and the maximum load is 2KG/4.4LB 3) Two 25mm DC carbon brush motors (motors with speed feedback circuit, Hall speed measurement), powerful power and powerful horsepower (each motor speed: 150±10% rpm), can achieve forward and backward, Rotating and other actions, running quickly and smoothly
-
0-5.5volt tolerant pins 0-6volt measurement Pin 1Hz - 40MHz frequency measurement
-
-
Complete set of Arduino's most common and useful electronic components. 21 lessons for Arduino starters and enthusiasts Detailed tutorial including project introduction and their source code will come with the kit
-
-
Smart Robot Car Mobile Chassis Kit comes with 3 PCS Hall motors, Strong power, intelligent speed adjustment, ensure fast and smooth operation Triangular design : 3 PCS Universal wheel, easy to move in multiple directions without turning The main parameters of Arduino Starter kit: Max load 2 kg, Max speed 20m/min, Max climbing angle 40°
-
Smart Car Robot Plastic Tire Wheel No load speed (6V): 100RPM No load current (6V): 60mA
-
-
The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of ± 16g. The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface. Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0 °
-
The MCP4725 is an I2C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller. On board are SCL, SDA, VCC, and another GND for your basic I2C pinout.
-
This MEGA Sensor Shield V2.0 dedicated sensor expansion board assembly market a variety of advantages in one of the expansion board design, PCB Immersion Gold processing technology. Board not only all digital and analog interface to the steering gear line order form extended out, but also ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 wireless RF module communication interface, and RB URF v1.1 ultrasonic sensor interface, independent expansion a more easy and convenient. For beginners, do not have to worry about cumbersome and complex circuit connection, will simplify this circuit sensor expansion board in the true sense, it can often be easily connected with the sensor.
-
Main chip: Atmega16U2, 100% compatible to Arduino This Mega2560 is compatible with most shields designed for the Arduino Duemilanove or Diecimila. 54 digital input/output pins, including 16 analog inputs, 4 UARTs (hardware serial ports), Clock Speed: 16 MHz
-
Transparent, full-duplex serial com-link Open-source firmware
-
UBEC OUtput: 5V @3A UBEC Input Voltage: 7-15V ( 2-12S ) Dimension: 68x50x8mm
-
Weight: 1.632 oz (no servo) Compatible with standard size Hitec or Futaba servos (sold separately). Utilizes both the .770" and 1.50" hub pattern.
-
-
Starter Set includes: 4 stationary beacons + 1 mobile beacon + 1 modem Location precision: +- 2cm Beacons measure distance to other beacons using ultrasonic pulses (time-of-flight)
-
-
Yes it actually works! Nitinol foil can be bent at room temperature or below, and returns to flat/straight upon heating. Incredibly strong, corrosion resistant, biocompatible material is soft at room temperature and stiff and springy at 50C and above Perfect for designing custom nitinol shape memory parts. Material can be heat treated to remember a new shape of your choosing.
-
Supports external trigger signal Accepts wide range of external signal level from 3V to 24V DC Global shutter for zero image skew
-
OMNI WHEELS ROBOT CAR: 4WD Omni-directional wheels and DC Speed Encoder Motor robotic car uses the latest mecanum wheels for omnidirectional movement and allow your robotics to not only travel forward and backward, but also sideways and diagonally((Left/Right Parallel Shift,Forward/Backward,Upper Left/Right Diagonal shift,Lower Right/Left Diagonal Shift).Perfect for tight spaces. SIMPLE, INTELLIGENT, FUN PROJECT: Control your OSOYOO Omni Wheels Robot Car by Android and iOS App, allowing many additional functions such as imitation driving and WiFi controlled auto driving.This intelligent, new technology supports various projects such as line tracking, obstacle avoidance and gravity sensing control. THE BEST VALUE PACK ON AMAZON: This Ultimate Gift Bundle Includes Everything You Need To Build and Engineer Your Own Robotic Car: WiFi Shield, Basic Board for Arduino, USB Cable, Model X Motor Driver Module, Bluetooth Module, Ultrasonic Sensor & Holder, Servo Motor, 3-Points Line Tracking Modules, Obstacle Sensors, Voltage Meter, Acrylic Car Chassis, 4 Motors 4 Mecanum Wheels, 18650 Battery Box.
-
-
The board is not isolated and all 4 channels share a common ground All the power is supplied by via USB The maximum output frequency is dependent on the speed of your system
-
The 1203 integrates a 20X2 White PhidgetTextLCD, and a PhidgetInterfaceKit 8/8/8 The PhidgetTextLCD allows you to display messages on a 2-line by 20-character LCD screen.
-
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 12 V with an available output current of around 15 A Typical efficiencies of 80% to 95% along with its high current capabilities make this regulator well suited for powering large loads The regulator features reverse voltage protection and a power-good output that indicates when the regulator cannot adequately maintain the output voltage
-
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 22 A without a heat sink The drivers offer basic current sensing and current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation