-
Advantages of LOCTITE Retaining Compared to Conventional Assembly Methods Higher strength with simplified and less costly designs Reduces dependence on machining tolerances Prevents corrosion and fretting Load and stress is distributed evenly over the Joint When Used in Combination With Interference Fits, LOCTITE Retaining Compounds Allow: Higher load transmission and better performance with existing designs and geometry. Equal performance with relaxed tolerances. Reductions in the size and weight of an assembly. Problems With Conventional Assembly Methods that LOCTITE Retaining Products Can Help Overcome Pins, key/keyway assemblies have uneven distribution of mass, an imbalance that can lead to vibration at high speeds. Splines and serrations cause high stresses due to the “notch effect” that occurs in the area of a key. And they have high machining costs. Clamp rings, press fits, shrink fits, and taper fits rely on friction alone to transmit torque, therefore they are limited by material, surfaces a
-
For best results, clean all surfaces (external and internal) with a LOCTITE cleaning solvent and allow to dry. 2. If the material is an inactive metal or the cure speed is too slow, spray all threads Shake the product thoroughly before use. To prevent the product from clogging in the nozzle, do not allow the tip to touch metal surfaces during application.
-
20 TIMES STRONGER: RADHESIVE pre-cut adhesive trips are made using a combination of prepolymers and curatives to bring you washable and reusable sticky adhesive strips that are 20 times stronger than your traditional tape making it perfect for securing all X-ray markers STICK TO ANY SURFACE: Each pack comes with 10 individual RADHESIVE strips in a resealable packet with a Pink X-Ray Marker Holder badge. Thanks to the unique formula, our double sided adhesive strips firmly attach to any surface including plastic, resin, aluminum, wood, metal and more without slipping TRACELESS & CONVENIENT: The X-Ray marker grip strips measure in at 1.5 inches x 3/4 inch and can easily be cut with a scissor to provide the perfect fit for your markers. Unlike tape and glue, they are easy to stick-on/peel-off and don’t leave behind any sticky residue which means no mess and no cleanups
-
Vulkem 116 has a 30-year history of delivering superior primerless adhesion to porous substrates, which makes it the choice for sealing expansion joints in commercial construction applications Vulkem 116 is suitable for certain water immersion applications. Vulkem 116 is rated for +/-25% movement capability.
-
2-part, high-density liquid polyurethane expanding pour foam cures very hard and rigid, with high compressive strength ideal for structural support, architectural castings, art-related applications, and flotation. 6 lb. density formula is great for plug making, filling buoys, creating sculptures, and more. Cures to a rigid, 94% closed-cell foam, where each individual cell traps air and prevents liquids like water, gas, and oil from penetrating.
-
3M Panel Bonding Adhesive is a two-part epoxy adhesive which provides extended work-time but can be rapidly cured with heat. It is packaged in a 200 ml cartridge and is to be used in conjunction with our 08117 Premium Manual Applicator and the 08193 Static Mixing Nozzles. Panel Bonding Adhesive has excellent adhesion to a wide variety of plastic and metal substrates.