-
Adhesives, Sealants and Lubricants (753)
-
Packaging and Shipping Supplies (63)
-
Robotics (110)
-
-
14 day clean removal leaves behind no damage or sticky residue Medium adhesive UV and sunlight resistant
-
This board is your entry to the unique Arduino experience: great for learning the basics of how sensors and actuators work, and an essential tool for your rapid prototyping needs Arduino Uno is the most used and documented board in the world "Uno" means one in Italian and was chosen to mark the release of Arduino Software (IDE) 1.0, now evolved to newer releases
-
The Table Top Robot is a hands-on science kit that teaches the basics of robotics by constructing a working robot crab. When activated, the robot crab scuttles under its own power and changes direction when it encounters an obstacle. Place it on a tabletop and watch it perform acrobatic tricks. No special tools or knowledge required; the kit contains detailed instructions and all the necessary parts.
-
Smart 4WD robot car chassis with 4 TT DC Gear Motor, horsepower fullness, Operating voltage: 3V - 12V. DC Motor Reduction Ratio: 1:48 (3V Motor No-load speed 125RPM). Robot chassis kit made of PCB material, Size:256*150*2MM, Maximum Load 500g.
-
Can accommodate wire sizes from 26 - 18 AWG Maximum ratings of 150 Vac and 6 Amps 2.54 mm Pitch
-
OMNI WHEELS ROBOT CAR: 4WD Omni-directional wheels and DC Speed Encoder Motor robotic car uses the latest mecanum wheels for omnidirectional movement and allow your robotics to not only travel forward and backward, but also sideways and diagonally((Left/Right Parallel Shift,Forward/Backward,Upper Left/Right Diagonal shift,Lower Right/Left Diagonal Shift).Perfect for tight spaces. SIMPLE, INTELLIGENT, FUN PROJECT: Control your OSOYOO Omni Wheels Robot Car by Android and iOS App, allowing many additional functions such as imitation driving and WiFi controlled auto driving.This intelligent, new technology supports various projects such as line tracking, obstacle avoidance and gravity sensing control. THE BEST VALUE PACK ON AMAZON: This Ultimate Gift Bundle Includes Everything You Need To Build and Engineer Your Own Robotic Car: WiFi Shield, Basic Board for Arduino, USB Cable, Model X Motor Driver Module, Bluetooth Module, Ultrasonic Sensor & Holder, Servo Motor, 3-Points Line Tracking Modules, Obstacle Sensors, Voltage Meter, Acrylic Car Chassis, 4 Motors 4 Mecanum Wheels, 18650 Battery Box.
-
Main chip: Atmega16U2, 100% compatible to Arduino This Mega2560 is compatible with most shields designed for the Arduino Duemilanove or Diecimila. 54 digital input/output pins, including 16 analog inputs, 4 UARTs (hardware serial ports), Clock Speed: 16 MHz
-
The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of ± 16g. The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface. Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0 °
-
-
500g payload, 320mm working range, 0.2mm repeatability. Arduino based, open source,ROS/Python/C++ SDK. GUI control software, Windows/Mac/Linux/iOS/Android support.
-
0-5.5volt tolerant pins 0-6volt measurement Pin 1Hz - 40MHz frequency measurement
-
SOIC8/16 SOP8/16 Flash Chip IC Test Clips Universal Adapter Clips Socket Adpter Programmer BIOS/24/25/93 (SOP16 Clip+Cable+Adapter Board) Programmer Testing Clip Sop16 Sop Soic 16 Soic16 Pin Ic Test Clamp Sop16 To Dip8 Flash Clip For 25 Series Rt809F Tl866Cs Tl866A. Suitable for 25 Series Wide and Narrow Body Chips, Supports 150MIL-300MIL SOP16 Chips.
-
This MEGA Sensor Shield V2.0 dedicated sensor expansion board assembly market a variety of advantages in one of the expansion board design, PCB Immersion Gold processing technology. Board not only all digital and analog interface to the steering gear line order form extended out, but also ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 wireless RF module communication interface, and RB URF v1.1 ultrasonic sensor interface, independent expansion a more easy and convenient. For beginners, do not have to worry about cumbersome and complex circuit connection, will simplify this circuit sensor expansion board in the true sense, it can often be easily connected with the sensor.
-
-
Starter Kit to Learn Arduino Includes the SparkFun RedBoard (Arduino compatible) ATmega328P
-
1-1/4" hub RX type For use on Siemens or Murray panels calling for RX type hub
-
Transparent, full-duplex serial com-link Open-source firmware
-
-
-
Made From High Temperature Nylon Provides Solid and Reliable Connection Excellent for High Current Applications
-
Use in conjunction with shafting and tubing Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key
-
Simply slide on a shaft and tighten the set screws. These adaptors work with any wheels that accept a 12mm hex pattern. These adaptors require a 3/32 hex key.
-
All-In-One LensPen > AR / VR Headset Cleaning Kit featuring: The LensPen > AR /VR pen which boasts a half inch cleaning tip, perfect for any size goggle or optic. Each pen comes with a handy retractable dust removal brush and a special non-liquid cleaning element, designed to never dry out. The patented carbon cleaning formula in the cap recharges, and self cleans every time the cap is twisted on and off. This simple yet extremely effective tool is exactly what you need to keep your gear clean This kit features some of our top selling products that work wonders to clean Virtual Reality equipment with over $30 worth of products included. Also included: The LensPen > AR / VR FogKlear which is an environmentally friendly dry anti-fog cloth that pre-treats lenses and optics to prevent them from fogging up and The LensPen > AR / VR MicroKlear which is perfect for cleaning the housings of headset. Everything is packaged in one handy compact and travel friendly zippered pouch. LensPen products are designed to remove fingerprints, smudges, dust and grease from any optic, headset or screen. LensPen Products have been cleaning high end optics for more than 25 years. Our products have been tested on wide variety of optics and are safe for use on all glass and high-end plastic (i.e. VR headsets & googles). If you run into any problems with one of our products, or have any questions or feedback, please reach out directly to LensPen and we will be happy to help you.
-
1/2" OD x 1/4" ID bearings Weight: 0.65 oz (each) Use with aluminum, carbon fiber, or steel tubing. Works great with PVC too! For mounting inside, we suggest using a 6-32 tapped standoff and 1/4" plastic spacers (shown above).
-
Control chip: L298N. Size: 55 x 60 x 30cm. Driven part of the terminal supply voltage: VMS 5V-35V. Driven part of the peak current IO: 2A per bridge.
-
Aluminum Alloy Car Platform - offer outstanding appearance, higher durability and stability Dual DC 9V Motor is equipped with a speed feedback circuit and Hall speed. Dual motor offer higher power and speed, Motor speed (minutes / revolutions): 150 Flexibility - go forward, go backward, turn left, turn right, turn around, Climbing angle: 45°
-
Made From High Temperature Nylon Provides Solid and Reliable Connection Excellent for High Current Applications
-
Supports external trigger signal Accepts wide range of external signal level from 3V to 24V DC Global shutter for zero image skew
-
Smart Robot Car Mobile Chassis Kit comes with 3 PCS Hall motors, Strong power, intelligent speed adjustment, ensure fast and smooth operation Triangular design : 3 PCS Universal wheel, easy to move in multiple directions without turning The main parameters of Arduino Starter kit: Max load 2 kg, Max speed 20m/min, Max climbing angle 40°
-
-
-
20° Pressure Angle O.D. = Outside Diameter P.D. = Pitch Diameter A = Bore (Nominal shaft hole A is for a tight press fit on given shaft size) A- 1/4" P.D.- 1.375" O.D.- 1.438" B- .437" C- 1.168" G- .437" E = 0.095" F = 0.185"
-
1) 2-layer structure design, platform panel can be freely loaded / DIY expansion, compatible with Arduino, Raspberry Pi platform for development 2) The chassis of the car has high stability, the aluminum alloy oxidized material chassis (thickness 3mm), the appearance is elegant and stable, and the maximum load is 2KG/4.4LB 3) Two 25mm DC carbon brush motors (motors with speed feedback circuit, Hall speed measurement), powerful power and powerful horsepower (each motor speed: 150±10% rpm), can achieve forward and backward, Rotating and other actions, running quickly and smoothly
-
Product Weight: 1.3 oz (no servo) Servo Spline Compatibility: 25T spline Servo Size Compatibility: Standard Size Servo
-
-
Product Weight: 1.3 oz (no servo) Servo Spline Compatibility: 24T spline Servo Size Compatibility: Standard Size Servo
-
The 10-32 set screw requires a 3/32" Hex Key (sold separately) This coupler is made specifically for the Futaba 25 tooth spline. Compatible with our 1/4" Precision Shafts and 1/4" D-shafts.
-
Made From High Temperature Nylon Provides Solid and Reliable Connection Excellent for High Current Applications
-
The MCP4725 is an I2C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller. On board are SCL, SDA, VCC, and another GND for your basic I2C pinout.
-
-
LCD display module white on Blue with Backlight, Built-in industry standard HD44780 equivalent LCD controller Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices LCD type: Characters
-
-
#18 Twisted Knotted polyethylene, 1-7/8" Square Mesh UV & Weather Treated 5/16" Rope Boder Around Perimeter w/ a Clip at Each Corner
-
-
Uses C1 Standard Spline Width = 1/4" (.250") / Pressure Angle = 20° FTC Legal
-
-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/8" to 6mm|Length: .75"|Diameter: .42"