-
3M 990 Mandrel Designed for use with the 3" x 3/8" radial bristle discs (PNs 07542, 07543, 07544) Allows stacking of one to four discs depending on the width of the surface to be cleaned
-
Arbor for POLIROLL cartridge rolls 1/4 inch 1-1/2-inches length
-
Double sealed, polished, and ground precision ball bearing, grease packed, and dirt-proof Product is manufactured in United States This product meets customer requirement
-
For mounting abrasive sanding sleeves Sleeves are secured in place by controlled expansion of solid rubber drum spindle Rubber expansion is controlled by tightening/loosening of the hex nut
-
6"L. Mandrel, 1" Pilot Length, For 1-1/2"L. x 1/8" Hole Cartridge Rolls, 1/4" Shank.
-
Box of 50 Half-Taper Spiral Cartridge Rolls, 5/8" Dia. x 1-1/2"L., 40 Grit, 1/8" Hole. Use with 2-3
-
100% brand new and high quality Note: Please confirm the size before paying Grits: 240
-
Replacement mandrel 6.5-Inch for quik-drive 1 piece per box
-
-
-
-
-
Great for work with sanding discs, especially Moore Brass Center Discs Made with nickel Made in Europe
-
3M 07500
-
Has a maximum speed of 35,000 rpm Supplied in packs of 4 Length 35 mm
-
Arbor for POLINOX cross buffs 25000 rpm maximum rotational speed Shank measures 1/4-inches diameter by 3-inches length
-
Shank length: 0.25-Inch Adaptor: 0.25-Inch, 0.375-Inch High-tensile steel for durability
-
Arbor for use with COMBIDISC Mini-Polifan discs Max operating speed 9, 800 sfpm Suitable for 3-inches diameter
-
All-metal fasteners^Mount to the Norton Speed-Lok TS or standard abrasive’s quick change back-up pads^Twist on and twist off in 2-1/2 turns^Disc locks securely to back-up pad, but is easily removed^Norton Speed-Lok fastener's quick, tool-free disc changes onto TS or TR back-up pads allow for more grinding time
-
Padlocks, Lockout/Tag out & Security Equipment Country of manufacture: Taiwan Manufacturer: POP
-
Cleaners, Resurfacers, Abrasives
-
Quick change mandrels for coated abrasive cartridge rolls Feature sharp, coarse threads which hold cartridge rolls securely in place during operation Rust proof finish
-
Designed for cleaning and finishing of airplane seat track channels Enables access to hard-to-reach recesses Securely holds a ¾-inch Roloc TS- or TSM-style disc to a die grinder or disc sander
-
Arbor for POLIROLL cartridge rolls 1/4 inch 1-1/2-inches length
-
1/4" x 1/4" Specially designed for Dedeco Industrial Rubberized Abrasive Wheels Also works with Cratex Wheels
-
Turn your Dremel or other rotary tool in to high-speed sander for tight fits 2pc set includes 5.0mm cylinder and 4.5mm to 3.0mm tapered cylinder Split mandrels can be used to hold sand paper (not included) & other flat media up to 0.75mm
-
Threaded pad backs screw tightly onto the mandrel Allows for quick and easy changes 1/4" shank chucks securely into rotary tools
-
Ideal for the thicker cut-off and grinding wheels 3/8" arbor with 1/4" shank Can be mounted in most drills and die grinders with 1/4" collet
-
-
This item is MANDREL, 37 DEGREE 376 This product is used for window-dressing-hardware This product manufactured in China
-
For mounting abrasive sanding sleeves Sleeves are secured in place by controlled expansion of solid rubber drum spindle Rubber expansion is controlled by tightening/loosening of the hex nut
-
Abrasive wheel mandrel converts 3/8" arbors to a 1/4" shank on small diameter abrasive cutting blades and grinding wheels Fits 3/8" arbor 1/4" shank
-
Great for work with unmounted wheels, stones, brushes and more Made with nickel Made in Europe
-
Authentic 3M Bristle Disc 2" Combo kit 3M 2" PAD HOLDER Mandrel P/N 45095 1-2" Disc 120 P/N 07526
-
For mounting on threaded shafts, these drums have a matching internal threaded bore Right Hand Threaded Shank Rubber expansion is controlled by tightening/loosening the hex nut
-
4" Spiral Sewn Buffing Wheel, 1/2" Thick, Cotton The Buffing Wheel with the Orange Thread Used for smaller Buffing jobs
-
Mpn: 39258 Country of manufacture: Taiwan Manufacturer: Marson
-
Rubber expanding drum has a 2" drum diameter and 1" drum width to mount 2" inside diameter sanding sleeves onto a grinder Attaches to a grinder that accepts 1/4"-diameter shank Drum expands when rotated to hold a sleeve in place without the use of adhesive or clamps
-
Mandrel mounts cartridge and spiral rolls onto a grinder that accepts a 1/4"-diameter shank Fits cartridge and spiral rolls with a 3/16"-diameter center hole, and is recommended for use with 2"-long rolls for maximum performance Steel provides strength and extended tool life
-
For use with all rotating accessories of the micromot rotary tool system and 38472 and 38481 rotary tools
-
Mandrel mounts cartridge and spiral rolls onto a grinder that accepts a 1/4"-diameter shank Fits cartridge and spiral rolls with a 1/8"-diameter center hole, and is recommended for use with 3/4"-long rolls for maximum performance Steel provides strength and extended tool life
-
Country Of Origin: United States Package length: 1.5" Package Width: 1.5"
-
Adaptable to a variety of shapes and conditions^Durable, long life; uniform finishes; improved surface quality^Can be used wet or dry; no dressing required; color coded for easy identification^Conventional hand pads: precision dot pattern for aggressive, consistent, fast cut rate, reduces dust and loading^Better performance level
-
RIDGID (EMERSON) PART NUMBER 41465 MANDREL, 37 DEGREE 376
-
Great for use with sanding papers to sand and finish the inside of rings Made of stainless steel and come with rubber bands to hold paper in place Includes one 3/8 inch mandrel
-
Quantity Of (1) Per Package
-
Mandrel mounts cartridge and spiral rolls onto a grinder that accepts a 1/4"-diameter shank Fits cartridge and spiral rolls with a 1/8"-diameter center hole, and is recommended for use with 1"-long rolls for maximum performance Steel provides strength and extended tool life
-
Mandrel mounts cartridge and spiral rolls onto a grinder that accepts a 1/4"-diameter shank Fits cartridge and spiral rolls with a 1/8"-diameter center hole, and is recommended for use with 2"-long rolls for maximum performance Steel provides strength and extended tool life