-
UBEC OUtput: 5V @3A UBEC Input Voltage: 7-15V ( 2-12S ) Dimension: 68x50x8mm -
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 22 A without a heat sink The drivers offer basic current sensing and current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation -
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key -
Yes it actually works! Nitinol foil can be bent at room temperature or below, and returns to flat/straight upon heating. Incredibly strong, corrosion resistant, biocompatible material is soft at room temperature and stiff and springy at 50C and above Perfect for designing custom nitinol shape memory parts. Material can be heat treated to remember a new shape of your choosing. -
This clamp requires a 7/64" Hex Key To make these hubs compatible with our 0.770" hub pattern, use our 1.50" x 0.770" Hub Adaptor. -
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key -
UniHobby 38mm 1.5inch Double Plastic Omni Wheels with 4mm mounting couplings for Arduino Robot Platforms It is unique as they are able to roll freely in two directions.And this 38mm omni wheel has 8 PU rollers. It's rollers are more durable, robust and flexible to provide the wheel 360 degree movement easily. -
This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 30 V operating range and can deliver continuous output currents up to 15 A without a heat sink Male headers and terminal blocks are included but not soldered, allowing for custom installations -
Smart Car Robot Plastic Tire Wheel No load speed (6V): 100RPM No load current (6V): 60mA -
Complete set of Arduino's most common and useful electronic components. 21 lessons for Arduino starters and enthusiasts Detailed tutorial including project introduction and their source code will come with the kit -
The board is not isolated and all 4 channels share a common ground All the power is supplied by via USB The maximum output frequency is dependent on the speed of your system -
The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver This fully-assembled version ships with header pins installed -
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 12 V with an available output current of around 15 A Typical efficiencies of 80% to 95% along with its high current capabilities make this regulator well suited for powering large loads The regulator features reverse voltage protection and a power-good output that indicates when the regulator cannot adequately maintain the output voltage -
Uses a 3F Standard Spline (25T) Width = 1/4" (.250") /Pressure Angle = 20° FTC Legal -
Uses a 3F Standard Spline (25T) Width = 1/4" (.250") /Pressure Angle = 20° FTC Legal
-
Uses a 3F Standard Spline (25T) Width = 1/4" (.250") /Pressure Angle = 20° FTC Legal
-
The 10-32 set screw requires a 3/32" Hex Key (sold separately) Compatible with our 1/4" PrecisionShafts and 1/4" D-shafts. Manufactured from hardened brass -
Material: Aluminum Coupling Style: Clamping Hole Pattern: 0.770" -
Weight: 1.632 oz (no servo) Compatible with standard size Hitec or Futaba servos (sold separately). Utilizes both the .770" and 1.50" hub pattern. -
Uses C1 Standard Spline Width = 1/4" (.250") / Pressure Angle = 20° FTC Legal -
-
LCD display module white on Blue with Backlight, Built-in industry standard HD44780 equivalent LCD controller Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices LCD type: Characters -
The MCP4725 is an I2C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller. On board are SCL, SDA, VCC, and another GND for your basic I2C pinout. -
Product Weight: 1.3 oz (no servo) Servo Spline Compatibility: 25T spline Servo Size Compatibility: Standard Size Servo -
20° Pressure Angle O.D. = Outside Diameter P.D. = Pitch Diameter A = Bore (Nominal shaft hole A is for a tight press fit on given shaft size) A- 1/4" P.D.- 1.375" O.D.- 1.438" B- .437" C- 1.168" G- .437" E = 0.095" F = 0.185" -
Simply slide on a shaft and tighten the set screws. These adaptors work with any wheels that accept a 12mm hex pattern. These adaptors require a 3/32 hex key. -
Use in conjunction with shafting and tubing Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key -
-
Transparent, full-duplex serial com-link Open-source firmware -
1-1/4" hub RX type For use on Siemens or Murray panels calling for RX type hub -
This MEGA Sensor Shield V2.0 dedicated sensor expansion board assembly market a variety of advantages in one of the expansion board design, PCB Immersion Gold processing technology. Board not only all digital and analog interface to the steering gear line order form extended out, but also ad hoc Bluetooth module communication interface, SD card module communication interface, APC220 wireless RF module communication interface, and RB URF v1.1 ultrasonic sensor interface, independent expansion a more easy and convenient. For beginners, do not have to worry about cumbersome and complex circuit connection, will simplify this circuit sensor expansion board in the true sense, it can often be easily connected with the sensor. -
SOIC8/16 SOP8/16 Flash Chip IC Test Clips Universal Adapter Clips Socket Adpter Programmer BIOS/24/25/93 (SOP16 Clip+Cable+Adapter Board) Programmer Testing Clip Sop16 Sop Soic 16 Soic16 Pin Ic Test Clamp Sop16 To Dip8 Flash Clip For 25 Series Rt809F Tl866Cs Tl866A. Suitable for 25 Series Wide and Narrow Body Chips, Supports 150MIL-300MIL SOP16 Chips. -
The ADXL345 is a small, thin, ultra-low power 3-axis accelerometer with high resolution (13 bits) and measurement range of ± 16g. The digital output data is in 16-bit twos complement format and is accessible via SPI (3-wire or 4-wire) or I2C digital interface. Its high resolution (3.9 mg / LSB) enables measurement of tilt angle changes of less than 1.0 ° -
Main chip: Atmega16U2, 100% compatible to Arduino This Mega2560 is compatible with most shields designed for the Arduino Duemilanove or Diecimila. 54 digital input/output pins, including 16 analog inputs, 4 UARTs (hardware serial ports), Clock Speed: 16 MHz -
Can accommodate wire sizes from 26 - 18 AWG Maximum ratings of 150 Vac and 6 Amps 2.54 mm Pitch