-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/4" to 8mm|Length: .75"|Diameter: .50"
-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/8" to 4mm|Length: .75"|Diameter: .42"
-
Target application scenario: High-speed communication interface interconnection Learning, debugging, research of soft cores such as RISC-V
-
These hubs use a 7/64" Hex Key These hubs utilize a 0.770" hub pattern.
-
(1) Servo Plate (1) Ball Bearing Plate (1) Servo Spline Shaft Hub (2) Hub Plates (12) 6-32 Screws Weight (no servo): 1.3 oz Perfect for robotics, animation, pan & tilt, and just about any project requiring servo power!
-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/8" to 6mm|Length: .75"|Diameter: .42"
-
The 10-32 set screw requires a 3/32" Hex Key (sold separately) This coupler is made specifically for the Futaba 25 tooth spline. Compatible with our 1/4" Precision Shafts and 1/4" D-shafts.
-
Product Weight: 1.3 oz (no servo) Servo Spline Compatibility: 24T spline Servo Size Compatibility: Standard Size Servo
-
-
1/2" OD x 1/4" ID bearings Weight: 0.65 oz (each) Use with aluminum, carbon fiber, or steel tubing. Works great with PVC too! For mounting inside, we suggest using a 6-32 tapped standoff and 1/4" plastic spacers (shown above).
-
0-5.5volt tolerant pins 0-6volt measurement Pin 1Hz - 40MHz frequency measurement