-
Robot Accessories (11)
-
Robot Parts (35)
-
Robot Platforms (11)
-
-
UBEC OUtput: 5V @3A UBEC Input Voltage: 7-15V ( 2-12S ) Dimension: 68x50x8mm
-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/4" to 8mm|Length: .75"|Diameter: .50"
-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/8" to 4mm|Length: .75"|Diameter: .42"
-
Electronics Building Blocks which you can connect to build DIY/Robotics projects An IIT Bombay Alumni Initiative for young innovators Build 101 cool projects by watching YouTube tutorials at your home
-
This shield makes it easy to control two high-power DC motors with your Arduino or Arduino-compatible board Its twin discrete MOSFET H-bridges support a wide 6.5 V to 30 V operating range and are efficient enough to deliver a continuous 22 A without a heat sink The drivers offer basic current sensing and current limiting functionality, and they accept ultrasonic PWM frequencies for quieter operation
-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key
-
Yes it actually works! Nitinol foil can be bent at room temperature or below, and returns to flat/straight upon heating. Incredibly strong, corrosion resistant, biocompatible material is soft at room temperature and stiff and springy at 50C and above Perfect for designing custom nitinol shape memory parts. Material can be heat treated to remember a new shape of your choosing.
-
Target application scenario: High-speed communication interface interconnection Learning, debugging, research of soft cores such as RISC-V
-
These hubs use a 7/64" Hex Key These hubs utilize a 0.770" hub pattern.
-
Supports external trigger signal Accepts wide range of external signal level from 3V to 24V DC Global shutter for zero image skew
-
This clamp requires a 7/64" Hex Key To make these hubs compatible with our 0.770" hub pattern, use our 1.50" x 0.770" Hub Adaptor.
-
-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key
-
UniHobby 38mm 1.5inch Double Plastic Omni Wheels with 4mm mounting couplings for Arduino Robot Platforms It is unique as they are able to roll freely in two directions.And this 38mm omni wheel has 8 PU rollers. It's rollers are more durable, robust and flexible to provide the wheel 360 degree movement easily.
-
Hold the pencil, brush, etc, and write well. Made of alloy Easy installation
-
This powerful motor controller makes basic control of a brushed DC motor easy, with quick configuration over USB using our free software It supports five control interfaces: USB, TTL serial, I²C, analog voltage (potentiometer), and hobby radio control (RC). This version offers a wide 6.5 V to 30 V operating range and can deliver continuous output currents up to 15 A without a heat sink Male headers and terminal blocks are included but not soldered, allowing for custom installations
-
Smart Car Robot Plastic Tire Wheel No load speed (6V): 100RPM No load current (6V): 60mA
-
Complete set of Arduino's most common and useful electronic components. 21 lessons for Arduino starters and enthusiasts Detailed tutorial including project introduction and their source code will come with the kit
-
The board is not isolated and all 4 channels share a common ground All the power is supplied by via USB The maximum output frequency is dependent on the speed of your system
-
The 18-channel Mini Maestro 18 raises the performance bar for serial servo controllers with features such as a native USB interface and internal scripting control Whether you want the best servo control available (0.25μs resolution with built-in speed and acceleration control and pulse rates up to 333 Hz) or a general I/O controller (e.g. to interface with a sensor or ESC via your USB port), this compact, versatile device will deliver This fully-assembled version ships with header pins installed
-
-
-
This synchronous switching step-down (or buck) regulator takes an input voltage of up to 40 V and efficiently reduces it to 12 V with an available output current of around 15 A Typical efficiencies of 80% to 95% along with its high current capabilities make this regulator well suited for powering large loads The regulator features reverse voltage protection and a power-good output that indicates when the regulator cannot adequately maintain the output voltage
-
Uses a 3F Standard Spline (25T) Width = 1/4" (.250") /Pressure Angle = 20° FTC Legal
-
Uses a 3F Standard Spline (25T) Width = 1/4" (.250") /Pressure Angle = 20° FTC Legal
-
Uses a 3F Standard Spline (25T) Width = 1/4" (.250") /Pressure Angle = 20° FTC Legal
-
The 10-32 set screw requires a 3/32" Hex Key (sold separately) Compatible with our 1/4" PrecisionShafts and 1/4" D-shafts. Manufactured from hardened brass
-
Material: Aluminum Coupling Style: Clamping Hole Pattern: 0.770"
-
(1) Servo Plate (1) Ball Bearing Plate (1) Servo Spline Shaft Hub (2) Hub Plates (12) 6-32 Screws Weight (no servo): 1.3 oz Perfect for robotics, animation, pan & tilt, and just about any project requiring servo power!
-
-
Weight: 1.632 oz (no servo) Compatible with standard size Hitec or Futaba servos (sold separately). Utilizes both the .770" and 1.50" hub pattern.
-
The 1203 integrates a 20X2 White PhidgetTextLCD, and a PhidgetInterfaceKit 8/8/8 The PhidgetTextLCD allows you to display messages on a 2-line by 20-character LCD screen.
-
Starter Set includes: 4 stationary beacons + 1 mobile beacon + 1 modem Location precision: +- 2cm Beacons measure distance to other beacons using ultrasonic pulses (time-of-flight)
-
Material = 303 Stainless Steel These shaft couplers require a 3/32 hex key. Bore: 1/8" to 6mm|Length: .75"|Diameter: .42"
-
-
Uses C1 Standard Spline Width = 1/4" (.250") / Pressure Angle = 20° FTC Legal
-
-
LCD display module white on Blue with Backlight, Built-in industry standard HD44780 equivalent LCD controller Commonly used in: copiers, fax machines, laser printers, industrial test equipment, networking equipment such as routers and storage devices LCD type: Characters
-
The MCP4725 is an I2C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analog signal, such as a sine wave, from a digital source, such as the I2C interface on the Arduino microcontroller. On board are SCL, SDA, VCC, and another GND for your basic I2C pinout.
-
The 10-32 set screw requires a 3/32" Hex Key (sold separately) This coupler is made specifically for the Futaba 25 tooth spline. Compatible with our 1/4" Precision Shafts and 1/4" D-shafts.
-
Product Weight: 1.3 oz (no servo) Servo Spline Compatibility: 24T spline Servo Size Compatibility: Standard Size Servo
-
-
Product Weight: 1.3 oz (no servo) Servo Spline Compatibility: 25T spline Servo Size Compatibility: Standard Size Servo
-
1) 2-layer structure design, platform panel can be freely loaded / DIY expansion, compatible with Arduino, Raspberry Pi platform for development 2) The chassis of the car has high stability, the aluminum alloy oxidized material chassis (thickness 3mm), the appearance is elegant and stable, and the maximum load is 2KG/4.4LB 3) Two 25mm DC carbon brush motors (motors with speed feedback circuit, Hall speed measurement), powerful power and powerful horsepower (each motor speed: 150±10% rpm), can achieve forward and backward, Rotating and other actions, running quickly and smoothly
-
20° Pressure Angle O.D. = Outside Diameter P.D. = Pitch Diameter A = Bore (Nominal shaft hole A is for a tight press fit on given shaft size) A- 1/4" P.D.- 1.375" O.D.- 1.438" B- .437" C- 1.168" G- .437" E = 0.095" F = 0.185"
-
-
Smart Robot Car Mobile Chassis Kit comes with 3 PCS Hall motors, Strong power, intelligent speed adjustment, ensure fast and smooth operation Triangular design : 3 PCS Universal wheel, easy to move in multiple directions without turning The main parameters of Arduino Starter kit: Max load 2 kg, Max speed 20m/min, Max climbing angle 40°