-
Polyurethane Adhesives (15)
-
Urethane Adhesives (24)
-
-
-
-
-
-
-
-
-
-
-
Increases the shear strength on non-threaded cylindrical metal assemblies Fills voids between close-fitting metal assemblies Creates a solid one-piece assembly
-
CHEMICALS LUBRICANTS & PAINTS Country of Manufacturer: United States Manufacturer: LOCTITE
-
Increases load-bearing characteristics of cylindrical joints Temperature resistance to 300°F (149°C) Easy-to-dispense, one component formula
-
Ideal for window, door and wall trim, cabinets, carpet, and vinyl flooring 3 day clean removal For interior and exterior use
-
Unique inorganic formulations for bonding and sealing materials High thermal and electrical resistance Water-based and do not outgas after curing
-
Increases load-bearing characteristics of cylindrical joints Temperature resistance to 300°F (149°C) Easy-to-dispense, one component formula
-
-
-
Increases the shear strength on non-threaded cylindrical metal assemblies Fills voids between close-fitting metal assemblies Creates a solid one-piece assembly
-
-
-
Adhesives & Sealants Country of manufacture: United States Manufacturer: Loctite
-
Sale Unit: BOTTLE
-
A low viscosity retaining compound that bonds rigid metal assemblies Easily joins dissimilar metals
-
Approvals: Canadian Food Inspection Agency (CFIA) Locks cylindrical assemblies up to 0.010" diameter Fixtures in 5 minutes
-
Best resistance to dynamic, axial and radial loads Ideal for shafts, gears, pulleys and similar cylindrical parts Diametrical clearance: Up to 0.25mm, Tensile shear strength: >25 N/mm²
-
LOCTITE 609 GREEN COLUR 50ML
-
-
A high viscosity liquid retaining compound Locks and secures metal cylindrical assemblies up to 0.015" diameter clearance Prevents metal fretting and corrosion
-
A creamy, non-running adhesive and sealant Repairs worn machine parts Restores correct fit to mating assemblies
-
Advantages of LOCTITE Retaining Compared to Conventional Assembly Methods Higher strength with simplified and less costly designs Reduces dependence on machining tolerances Prevents corrosion and fretting Load and stress is distributed evenly over the Joint When Used in Combination With Interference Fits, LOCTITE Retaining Compounds Allow: Higher load transmission and better performance with existing designs and geometry. Equal performance with relaxed tolerances. Reductions in the size and weight of an assembly. Problems With Conventional Assembly Methods that LOCTITE Retaining Products Can Help Overcome Pins, key/keyway assemblies have uneven distribution of mass, an imbalance that can lead to vibration at high speeds. Splines and serrations cause high stresses due to the “notch effect” that occurs in the area of a key. And they have high machining costs. Clamp rings, press fits, shrink fits, and taper fits rely on friction alone to transmit torque, therefore they are limited by material, surfaces a
-
A high viscosity liquid retaining compound Locks and secures metal cylindrical assemblies up to .015" diameter clearance Prevents metal fretting and corrosion
-
Loctite 609 50ml Retaining Compound Medium Strength Glue
-
ADHESIVES SEALANTS & TAPES Country of Manufacturer: United States Manufacturer: LOCTITE
-
-
CHEMICALS LUBRICANTS & PAINTS Country of Manufacturer: United States Manufacturer: LOCTITE
-
Lasting Asphalt Repair - Excellent adhesion & absorbs impact Open to Traffic Quickly - Reduce traffic interruptions Odorless - 100% solids & suitable for both outdoor and indoor applications
-
For best results, clean all surfaces (external and internal) with a LOCTITE cleaning solvent and allow to dry. 2. If the material is an inactive metal or the cure speed is too slow, spray all threads Shake the product thoroughly before use. To prevent the product from clogging in the nozzle, do not allow the tip to touch metal surfaces during application.
-
-
Spec. Gravity 2.79 g/cc Cured, Viscosity Paste ot Life 30 min solids contents, % 100 Mechanical Properties Hardness, Shore D 83 Adhesive Shrinkage linear in/in 0.003,Lap shear strength,psi 9400 Vol Resistivity ohm cm less than 0.0003
-
Two component polyurethane Components are mixed and easily dispensed with a squeeze trigger Use on many materials wood, concrete, ceramic, metal and glass.
-
Date on Tube is Date Manufactured. Shelf Life is 18 Months from that Date
-
Ad-Vanced Carpet Adhesive - 1 Gallon
-
20 TIMES STRONGER: RADHESIVE pre-cut adhesive trips are made using a combination of prepolymers and curatives to bring you washable and reusable sticky adhesive strips that are 20 times stronger than your traditional tape making it perfect for securing all X-ray markers STICK TO ANY SURFACE: Each pack comes with 10 individual RADHESIVE strips in a resealable packet with a Pink X-Ray Marker Holder badge. Thanks to the unique formula, our double sided adhesive strips firmly attach to any surface including plastic, resin, aluminum, wood, metal and more without slipping TRACELESS & CONVENIENT: The X-Ray marker grip strips measure in at 1.5 inches x 3/4 inch and can easily be cut with a scissor to provide the perfect fit for your markers. Unlike tape and glue, they are easy to stick-on/peel-off and don’t leave behind any sticky residue which means no mess and no cleanups
-
-
-
Contains no CFCs Provides excellent sound barrier Shelf life from date of manufacture 12 months
-
material type: Acrylic-Urethane